Design and Development of a Low-Power IoT System for Continuous Temperature Monitoring
Designs · 12.06.2025 · 9 (3) · 73
DOI: 10.3390/designs9030073 ↗Kurz gefasst
Fachartikel in der Zeitschrift Designs, online erschienen am 12.06.2025. Verfasst von Luis Miguel Pires und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This article presents the development of a compact, high-precision, and energy-efficient temperature monitoring system designed for tracking applications where continuous and accurate thermal monitoring is essential. Built around the HY0020 System-on-Chip (SoC), the system integrates two bandgap-based temperature sensors—one internal to the SoC and one external (Si7020-A20)—mounted on a custom PCB and powered by a coin cell battery. A distinctive feature of the system is its support for real-time parameterization of the internal sensor, which enables advanced capabilities such as thermal profiling, cross-validation, and onboard diagnostics. The system was evaluated under both room temperature and refrigeration conditions, demonstrating high accuracy with the internal sensor showing an average error of 0.041 °C and −0.36 °C, respectively, and absolute errors below ±0.5 °C. With an average current draw of just 0.01727 mA, the system achieves an estimated autonomy of 6.6 years on a 1000 mAh battery. Data are transmitted via Bluetooth Low Energy (BLE) to a Raspberry Pi 4 gateway and forwarded to an IoT cloud platform for remote access and analysis. With a total cost of approximately EUR 20 and built entirely from commercially available components, this system offers a scalable and cost-effective solution for a wide range of temperature-sensitive applications. Its combination of precision, long-term autonomy, and advanced diagnostic capabilities make it suitable for deployment in diverse fields such as supply chain monitoring, environmental sensing, biomedical storage, and smart infrastructure—where reliable, low-maintenance thermal tracking is essential.
Zitieren
APA
Pires, L. M., Figueiredo, J., Martins, R., Nascimento, J., & Martins, J. (2025). Design and Development of a Low-Power IoT System for Continuous Temperature Monitoring. Designs, 9(3), 73. https://doi.org/10.3390/designs9030073
Vancouver
Pires LM, Figueiredo J, Martins R, Nascimento J, Martins J. Design and Development of a Low-Power IoT System for Continuous Temperature Monitoring. Designs. 2025;9(3):73. doi:10.3390/designs9030073
BibTeX
@article{Pires2025,
author = {Pires, Luis Miguel and Figueiredo, João and Martins, Ricardo and Nascimento, João and Martins, José},
title = {Design and Development of a Low-Power IoT System for Continuous Temperature Monitoring},
journal = {Designs},
year = {2025},
volume = {9},
number = {3},
pages = {73},
doi = {10.3390/designs9030073}
}
EUVIMED