EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Cost, Low-Power Edge Computing System for Structural Health Monitoring in an IoT Framework

Eduardo Hidalgo-Fort iD, Pedro Blanco-Carmona, Fernando Muñoz-Chavero iD, Antonio Torralba iD, Rafael Castro-Triguero iD

Sensors · 05.08.2024 · 24 (15) · 5078

DOI: 10.3390/s24155078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 05.08.2024. Verfasst von Eduardo Hidalgo-Fort und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Engineering, University of Seville, 41092 Seville, Spain. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A complete low-power, low-cost and wireless solution for bridge structural health monitoring is presented. This work includes monitoring nodes with modular hardware design and low power consumption based on a control and resource management board called CoreBoard, and a specific board for sensorization called SensorBoard is presented. The firmware is presented as a design of FreeRTOS parallelised tasks that carry out the management of the hardware resources and implement the Random Decrement Technique to minimize the amount of data to be transmitted over the NB-IoT network in a secure way. The presented solution is validated through the characterization of its energy consumption, which guarantees an autonomy higher than 10 years with a daily 8 min monitoring periodicity, and two deployments in a pilot laboratory structure and the Eduardo Torroja bridge in Posadas (Córdoba, Spain). The results are compared with two different calibrated commercial systems, obtaining an error lower than 1.72% in modal analysis frequencies. The architecture and the results obtained place the presented design as a new solution in the state of the art and, thanks to its autonomy, low cost and the graphical device management interface presented, allow its deployment and integration in the current IoT paradigm.

Schlagwörter

Stichwörter der Autor:innen

IoTSHMedge computingwireless sensor network

Autor:innen und Institutionen

  • Department of Electronic Engineering, University of Seville, 41092 Seville, Spain.
  • Mechanics of Continuous Media and Theory of Structures, University of Córdoba, 14071 Córdoba, Spain.

ORCID-Profile: Eduardo Hidalgo-Fort, Fernando Muñoz-Chavero, Antonio Torralba, Rafael Castro-Triguero

Zitieren

APA

Hidalgo-Fort, E., Blanco-Carmona, P., Muñoz-Chavero, F., Torralba, A., & Castro-Triguero, R. (2024). Low-Cost, Low-Power Edge Computing System for Structural Health Monitoring in an IoT Framework. Sensors, 24(15), 5078. https://doi.org/10.3390/s24155078

Vancouver

Hidalgo-Fort E, Blanco-Carmona P, Muñoz-Chavero F, Torralba A, Castro-Triguero R. Low-Cost, Low-Power Edge Computing System for Structural Health Monitoring in an IoT Framework. Sensors. 2024;24(15):5078. doi:10.3390/s24155078

BibTeX
@article{HidalgoFort2024,
  author = {Hidalgo-Fort, Eduardo and Blanco-Carmona, Pedro and Muñoz-Chavero, Fernando and Torralba, Antonio and Castro-Triguero, Rafael},
  title = {Low-Cost, Low-Power Edge Computing System for Structural Health Monitoring in an IoT Framework},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {15},
  pages = {5078},
  doi = {10.3390/s24155078}
}
Kostenlos starten →