EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design

Youkai Li, Chengyong Chen, Baoqun Wang, Changjing Xu, Ziqi Ge, Lu Zhang, Jiazheng Ji, Chaoqun Sun

Designs · 17.11.2026 · 10 (6) · 134

DOI: 10.3390/designs10060134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Designs, online erschienen am 17.11.2026. Verfasst von Youkai Li und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Expressway Infrastructure Construction Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design of resin-anchored rock bolt systems requires an assessment of pull-out response and potential damage under different anchorage lengths and rock-strength conditions. This study investigates the pull-out response and simulated crack evolution of resin-anchored rock bolts through laboratory experiments and two-dimensional discrete element simulations. A PFC2D model comprising rock bolts, resin grout, and surrounding rock was established, with material parameters calibrated for three specimen-scale strength groups: hard rock, moderately hard rock, and soft rock. The experimental S120 specimen exhibited a peak pull-out load of 113 kN at a displacement of 10.8 mm. Comparison of the normalized experimental and numerical load–displacement curves showed similar overall loading and post-peak softening characteristics. The numerical results revealed differences in simulated crack development among the three material groups. Tensile cracks constituted the largest recorded crack category in the investigated hard-, moderately hard-, and soft-rock configurations, whereas tension–shear cracks constituted the largest category in several moderately hard- and soft-rock configurations. In the soft-rock simulations, aggregate crack counts exhibited non-monotonic variations with increasing anchorage length, with relatively low values observed at certain intermediate lengths. For the crack-count comparisons, three simulations with different random seeds were performed for each configuration to examine the influence of particle arrangement. These results characterize the responses of the investigated numerical configurations rather than statistically verified anchorage-length trends. The findings provide insights into load-transfer characteristics and simulated damage evolution in simplified resin-anchorage systems and may inform the preliminary comparison of anchorage configurations in engineering design. Their interpretation remains subject to the assumptions of the two-dimensional model and the limited number of numerical realizations.

Förderung

  • Shandong Expressway Infrastructure Construction Co., Ltd.

Zitieren

APA

Li, Y., Chen, C., Wang, B., Xu, C., Ge, Z., Zhang, L., Ji, J., & Sun, C. (2026). PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design. Designs, 10(6), 134. https://doi.org/10.3390/designs10060134

Vancouver

Li Y, Chen C, Wang B, Xu C, Ge Z, Zhang L, et al. PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design. Designs. 2026;10(6):134. doi:10.3390/designs10060134

BibTeX
@article{Li2026,
  author = {Li, Youkai and Chen, Chengyong and Wang, Baoqun and Xu, Changjing and Ge, Ziqi and Zhang, Lu and Ji, Jiazheng and Sun, Chaoqun},
  title = {PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design},
  journal = {Designs},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {134},
  doi = {10.3390/designs10060134}
}
Kostenlos starten →