EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Study on Mechanical Mechanism and Pull-out Bearing Capacity of Cylindrical Reaming Anchorage

Aolong Liu

International Journal of Natural Resources and Environmental Studies · 14.05.2026 · 8 (4) · 150-156

DOI: 10.62051/ijnres.v8n4.14 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Natural Resources and Environmental Studies, online erschienen am 14.05.2026. Verfasst von Aolong Liu. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the engineering challenges of low anchorage capacity, easy shear debonding failure at the anchorage interface, and the difficult long-term stability control of the roof in deep coal mine soft-rock roadways, a refined 3D numerical model was established in Abaqus based on the bolt-adhesive-surrounding rock collaborative bearing theory and the interfacial shear transfer theory. The influence of cylindrical straight reaming diameter on bolt pull-out behavior was systematically investigated. Seven reaming diameters (24, 30, 40, 50, 60, 70, and 80 mm) were used to analyze the peak pull-out force, load evolution characteristics, stress distribution of the anchorage agent, interfacial load transfer characteristics, and the evolution of anchorage failure modes. Results show that the peak pull-out force exhibits a three-stage trend: rapid increase, slight decrease, and gradual rise with rising reaming diameter. At a 40 mm reaming diameter, the anchorage agent stress distribution is relatively uniform, local stress concentrations are low, and the collaborative bearing state is ideal, yielding a peak pull-out force of 143 kN, which can be used as a reasonable engineering reaming diameter. When the reaming diameter exceeds 50 mm, the effective bearing thickness of the surrounding rock is insufficient; the borehole wall rock gradually enters a plastic softening state; the effective shear capacity decreases; and the pull-out force declines. Within 60–80 mm, the gain from increased contact area compensates to some extent for the weakening of the surrounding rock, and the pull-out force continues to rise. However, surrounding rock damage is severe, construction costs increase significantly, and the engineering practical value is limited. This study can provide a sufficient theoretical basis and reference for mechanism analysis, parameter optimization, and engineering design of reaming bolt support.

Zitieren

APA

Liu, A. (2026). Study on Mechanical Mechanism and Pull-out Bearing Capacity of Cylindrical Reaming Anchorage. International Journal of Natural Resources and Environmental Studies, 8(4), 150-156. https://doi.org/10.62051/ijnres.v8n4.14

Vancouver

Liu A. Study on Mechanical Mechanism and Pull-out Bearing Capacity of Cylindrical Reaming Anchorage. International Journal of Natural Resources and Environmental Studies. 2026;8(4):150-156. doi:10.62051/ijnres.v8n4.14

BibTeX
@article{Liu2026,
  author = {Liu, Aolong},
  title = {Study on Mechanical Mechanism and Pull-out Bearing Capacity of Cylindrical Reaming Anchorage},
  journal = {International Journal of Natural Resources and Environmental Studies},
  year = {2026},
  volume = {8},
  number = {4},
  pages = {150--156},
  doi = {10.62051/ijnres.v8n4.14}
}
Kostenlos starten →