Effect of Welding Speed on Microstructure and Mechanical Properties of AE-CMT-Welded AZ31B Magnesium Alloy Joints
Crystals · 01.08.2026 · 16 (8) · 503
DOI: 10.3390/cryst16080503 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 01.08.2026. Verfasst von Xin Wang und 5 weiteren Autor:innen. Die Arbeit nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Shanxi Province, Special Program for the Transformation of Scientific and Technological Achievements of Shanxi Province, Special Program for Scientific and Technological Cooperation and Exchange of Shanxi Province.
Abstract (Originalsprache)
In order to verify the reliability and engineering applicability of the AE-CMT welding technology for magnesium alloy joining, AE-CMT welding experiments were conducted at welding speeds ranging from 0.5 to 3.0 m/min on 1.5 mm-thick H24-temper AZ31B magnesium alloy sheets using imported 1.2 mm-diameter WE-33M welding wire. Within the welding speed range of 0.5–3.0 m/min, increasing the welding speed progressively reduces heat input, thereby refining grains and homogenizing the microstructure. The welding heat input of the AE-CMT process ranges from 0.47 KJ/mm to 1.07 KJ/mm, and the grain sizes of the weld zone and HAZ are 9.61–14.18 μm and 6.35–12.22 μm, respectively. In the range of 0.5–2.0 m/min welding speed, increasing welding speed progressively enhances the tensile strength of the welded joint. Notably, joints fabricated at a welding speed of 2.0 m/min deliver the maximum tensile strength, equivalent to 98.0% of the base metal. Well-defined dimples are also detected on the corresponding fracture surfaces. A further increase in welding speed leads to a gradual reduction in the tensile strength of the welded joint. It is demonstrated that welding speed acts as a critical process parameter for tailoring the microstructure and mechanical properties of AE-CMT-welded AZ31B magnesium alloy joints.
Förderung
- Key Research and Development Program of Shanxi Province
- Special Program for the Transformation of Scientific and Technological Achievements of Shanxi Province
- Special Program for Scientific and Technological Cooperation and Exchange of Shanxi Province
Zitieren
APA
Wang, X., Liu, C., Li, Y., Feng, Y., Duan, Y., & Wu, Z. (2026). Effect of Welding Speed on Microstructure and Mechanical Properties of AE-CMT-Welded AZ31B Magnesium Alloy Joints. Crystals, 16(8), 503. https://doi.org/10.3390/cryst16080503
Vancouver
Wang X, Liu C, Li Y, Feng Y, Duan Y, Wu Z. Effect of Welding Speed on Microstructure and Mechanical Properties of AE-CMT-Welded AZ31B Magnesium Alloy Joints. Crystals. 2026;16(8):503. doi:10.3390/cryst16080503
BibTeX
@article{Wang2026,
author = {Wang, Xin and Liu, Cuirong and Li, Yan and Feng, Yulan and Duan, Yuhui and Wu, Zhisheng},
title = {Effect of Welding Speed on Microstructure and Mechanical Properties of AE-CMT-Welded AZ31B Magnesium Alloy Joints},
journal = {Crystals},
year = {2026},
volume = {16},
number = {8},
pages = {503},
doi = {10.3390/cryst16080503}
}
EUVIMED