EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of welding conditions on the mechanical and microstructural behavior of AZ31B magnesium alloy welded joints by the FSW process

José Wallisson de Abreu Sousa, Cícero de Lima Santos, Oclávio Coutinho dos Santos, Francisco Mendes de Abreu, João Baptista da Costa Agra de Melo, Marco Antonio dos Santos, Raphael Henrique Falcão de Melo

The International Journal of Advanced Manufacturing Technology · 2026-05 · 144 (1-2) · 1165-1181

DOI: 10.1007/s00170-026-17586-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 01.04.2026. Verfasst von José Wallisson de Abreu Sousa und 6 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade Federal De Campina Grande.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnesium alloys have experienced continuous growth in industrial applications by ensuring a good in strength-to-weight ratio. nevertheless, these alloys have limitations when welded by conventional processes, culminating in degradation of mechanical properties. Friction stir welding, which is more efficient as it operates below the melting temperature range, was used in this study to evaluate the influence of welding parameters on the mechanical properties of AZ31B Mg alloy welded joints. Uniaxial tensile and microhardness tests were performed, along with analyses using an optical microscope and a scanning electron microscope. Significant mechanical strength was achieved, with average values ranging from 155 to 197 MPa, resulting in an efficiency of 57% to 72%. The statistical analysis demonstrated that the effects were statistically significant within the experimental range, particularly with respect to the tool tilt angle. The fractures were concentrated on the interface between the base material and the joint mixing region. Significant grain refinement was achieved through the combined effects of temperature, mechanical work, and plastic flow, resulting in an average grain size reduction of approximately 68% relative to the base material and microhardness values of about 66 HV.

Förderung

  • Universidade Federal De Campina Grande

Zitieren

APA

Sousa, J. W. D. A., Santos, C. D. L., Santos, O. C. D., Abreu, F. M. D., Melo, J. B. D. C. A. D., Santos, M. A. D., & Melo, R. H. F. D. (2026). Effect of welding conditions on the mechanical and microstructural behavior of AZ31B magnesium alloy welded joints by the FSW process. The International Journal of Advanced Manufacturing Technology, 144(1-2), 1165-1181. https://doi.org/10.1007/s00170-026-17586-9

Vancouver

Sousa JWDA, Santos CDL, Santos OCD, Abreu FMD, Melo JBDCAD, Santos MAD, et al. Effect of welding conditions on the mechanical and microstructural behavior of AZ31B magnesium alloy welded joints by the FSW process. The International Journal of Advanced Manufacturing Technology. 2026;144(1-2):1165-1181. doi:10.1007/s00170-026-17586-9

BibTeX
@article{Sousa2026,
  author = {Sousa, José Wallisson de Abreu and Santos, Cícero de Lima and Santos, Oclávio Coutinho dos and Abreu, Francisco Mendes de and Melo, João Baptista da Costa Agra de and Santos, Marco Antonio dos and Melo, Raphael Henrique Falcão de},
  title = {Effect of welding conditions on the mechanical and microstructural behavior of AZ31B magnesium alloy welded joints by the FSW process},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {144},
  number = {1-2},
  pages = {1165--1181},
  doi = {10.1007/s00170-026-17586-9}
}
Kostenlos starten →