Investigation of Mechanical and Tribological Behaviour of SiC- and Carbon Nanotube-Reinforced Aluminium Matrix Hybrid Nanocomposites
Crystals · 09.06.2026 · 16 (6) · 384
DOI: 10.3390/cryst16060384 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 09.06.2026. Verfasst von Arpita Chatterjee und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Enhancing the mechanical performance of aluminium-based materials remains a critical challenge for their application in demanding environments. In this context, aluminium-based hybrid nanocomposites reinforced with multi-walled carbon nanotubes (MWCNTs) and nano-sized silicon carbide (nSiC) have been developed to overcome inherent limitations of pure aluminium, such as relatively low hardness, limited compressive strength and poor wear resistance. The composites were fabricated via powder metallurgy by incorporating a fixed 1 wt.% MWCNT content along with varying nSiC additions in the range of 0–4 wt.%, enabling a systematic evaluation of the effect of hybrid reinforcement on the overall material properties. Compared to pure aluminium, the composites exhibited significant improvements in mechanical and tribological properties, with the Al–1 wt.% MWCNT–4 wt.% nSiC composition showing the highest enhancement, achieving increases of ~149% in hardness and ~45% in compressive strength. Microstructural analysis revealed strong matrix–reinforcement bonding, notable grain refinement, and a largely uniform reinforcement distribution, with minor agglomeration at higher nSiC content. The hybrid nanocomposites also demonstrated superior wear resistance, while fractography indicated a transition from ductile fracture in pure aluminium to a mixed intergranular–transgranular mode, promoting effective load transfer and improved performance.
Zitieren
APA
Chatterjee, A., Sinha, S., Das, P., Paul, S., Ghosh, A., & Ghosh, M. (2026). Investigation of Mechanical and Tribological Behaviour of SiC- and Carbon Nanotube-Reinforced Aluminium Matrix Hybrid Nanocomposites. Crystals, 16(6), 384. https://doi.org/10.3390/cryst16060384
Vancouver
Chatterjee A, Sinha S, Das P, Paul S, Ghosh A, Ghosh M. Investigation of Mechanical and Tribological Behaviour of SiC- and Carbon Nanotube-Reinforced Aluminium Matrix Hybrid Nanocomposites. Crystals. 2026;16(6):384. doi:10.3390/cryst16060384
BibTeX
@article{Chatterjee2026,
author = {Chatterjee, Arpita and Sinha, Samjukta and Das, Prabhat and Paul, Saikat and Ghosh, Abhishek and Ghosh, Manojit},
title = {Investigation of Mechanical and Tribological Behaviour of SiC- and Carbon Nanotube-Reinforced Aluminium Matrix Hybrid Nanocomposites},
journal = {Crystals},
year = {2026},
volume = {16},
number = {6},
pages = {384},
doi = {10.3390/cryst16060384}
}
EUVIMED