EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Precipitation of Carbides in FeCr15Alx Alloys with Different Heat Treatments Studied by Internal Friction Technique

Yan Sun, Yuankai Jiang, Hongquan Zhang, Xinggang Wang, Weibin Jiang, Meng Sun

Crystals · 11.05.2026 · 16 (5) · 324

DOI: 10.3390/cryst16050324 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 11.05.2026. Verfasst von Yan Sun und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fe-Cr-based alloys have great potential for large-scale vibration and noise reduction. Appropriate heat treatment is important for improving their damping capacity. However, M23C6-type carbides are common grain boundary precipitates during the heat treatment process, and can affect both damping behavior and mechanical properties. In this work, the effects of Al content and annealing temperature on the microstructure, internal friction (IF), room temperature damping capacity, and tensile properties of Fe-15Cr-(0-4) Al (wt.%) alloys were investigated. When annealed at 800 °C, Al addition can suppress grain boundary precipitation, and no obvious intergranular precipitates were observed in the S2Al-S4Al alloys. The ultimate tensile strength also increased with Al addition, and the S4Al alloy exhibited a 34% higher strength than S0Al while retaining an elongation of 47.7%. The maximum damping value increased with Al addition. However, annealing at 1000 °C promoted continuous grain boundary carbide formation and reduced the elongation. These results indicate that the S4Al alloy annealed at 800 °C provides a favorable balance between damping capacity and mechanical properties.

Förderung

  • Anhui Provincial Natural Science Foundation

Zitieren

APA

Sun, Y., Jiang, Y., Zhang, H., Wang, X., Jiang, W., & Sun, M. (2026). Precipitation of Carbides in FeCr15Alx Alloys with Different Heat Treatments Studied by Internal Friction Technique. Crystals, 16(5), 324. https://doi.org/10.3390/cryst16050324

Vancouver

Sun Y, Jiang Y, Zhang H, Wang X, Jiang W, Sun M. Precipitation of Carbides in FeCr15Alx Alloys with Different Heat Treatments Studied by Internal Friction Technique. Crystals. 2026;16(5):324. doi:10.3390/cryst16050324

BibTeX
@article{Sun2026,
  author = {Sun, Yan and Jiang, Yuankai and Zhang, Hongquan and Wang, Xinggang and Jiang, Weibin and Sun, Meng},
  title = {Precipitation of Carbides in FeCr15Alx Alloys with Different Heat Treatments Studied by Internal Friction Technique},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {324},
  doi = {10.3390/cryst16050324}
}
Kostenlos starten →