Precipitation and evolution of carbides in Fe-Cr-Al alloys under heat treatments
Metallurgical Research & Technology · 2026 · 123 (4) · 404
DOI: 10.1051/metal/2026029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 21.05.2026. Verfasst von Han Meng und 4 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Liaoning Universities.
Abstract (Originalsprache)
This study systematically investigates the precipitation and evolution behaviors of TiC, ZrC, and YC 2 carbides in FeCrAl alloys through heat treatments at 600, 900, and 1200 °C, combined with thermodynamic calculations, growth kinetics modeling, and dissolution simulations. The results show that the precipitation of the three carbides exhibits strong temperature dependence: TiC and ZrC are the dominant phases in the as-received alloy; after heat treatment at 600 and 900 °C, YC 2 becomes the main precipitated phase; at 1200 °C, TiC and ZrC re-precipitate extensively, forming fine TiC nanoparticles and irregular ZrC–YC 2 composite structures. Thermodynamic analysis indicates that all three carbides satisfy the liquid-phase precipitation conditions within the carbon range of 0.005–0.05 wt.%, among which YC 2 shows the strongest precipitation tendency. Competitive stability calculations reveal that TiC exhibits the highest thermodynamic stability at elevated temperatures, followed by ZrC, whereas YC 2 remains stable mainly at lower temperatures. Growth kinetics results show that carbide size increases with carbon content, with YC 2 exhibiting the largest growth, followed by TiC, while ZrC grows the least. According to the LSW theoretical prediction, the coarsening of the three carbides is minimal within 600–1200 °C, and the sizes of TiC and YC 2 remain nearly unchanged. Dissolution simulations further demonstrate a strong temperature sensitivity: at 1200 °C, the dissolution time of 5 μm carbides is significantly reduced, with TiC, ZrC, and YC 2 requiring 125.47, 233.47, and 229.40 s, respectively, whereas at 600 and 900 °C, the dissolution time increases sharply.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Liaoning Universities
Zitieren
APA
Meng, H., Tao, K., Cao, L., Li, G., & Wang, G. (2026). Precipitation and evolution of carbides in Fe-Cr-Al alloys under heat treatments. Metallurgical Research & Technology, 123(4), 404. https://doi.org/10.1051/metal/2026029
Vancouver
Meng H, Tao K, Cao L, Li G, Wang G. Precipitation and evolution of carbides in Fe-Cr-Al alloys under heat treatments. Metallurgical Research & Technology. 2026;123(4):404. doi:10.1051/metal/2026029
BibTeX
@article{Meng2026,
author = {Meng, Han and Tao, Ke and Cao, Lei and Li, Gang and Wang, Guocheng},
title = {Precipitation and evolution of carbides in Fe-Cr-Al alloys under heat treatments},
journal = {Metallurgical Research & Technology},
year = {2026},
volume = {123},
number = {4},
pages = {404},
doi = {10.1051/metal/2026029}
}
EUVIMED