EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Scale Characterization of Industrial Steel Slags Using XRF and SEM–EDS Phase Mapping

Okhunjon Sayfidinov, Susheng Tan, Bakhtiyor Mardonov, Makhliyo Sayfidinova, Baibhaw Kumar

Crystals · 07.04.2026 · 16 (4) · 246

DOI: 10.3390/cryst16040246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 07.04.2026. Verfasst von Okhunjon Sayfidinov und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steel slags are major by-products of steelmaking, and their variable composition complicates recycling and valorization strategies. This study investigates four representative slag samples obtained from different production pathways at an industrial steel plant in Uzbekistan, using a combined multi-scale characterization approach. Bulk elemental composition was determined using X-ray fluorescence (XRF), while microstructural and phase-level analysis was carried out using scanning electron microscopy with energy-dispersive spectroscopy (SEM–EDS), including both point analysis and automated phase mapping. The XRF results revealed two distinct compositional groups, with one slag dominated by Mn–Si–O chemistry and three slags characterized by high Ca content. SEM–EDS phase mapping further resolved these differences at the microscale, identifying manganese silicate and oxide phases in the Mn-rich slag, Ca–F–O dominant phases in two slags associated with fluorite flux addition, and a more heterogeneous Ca-based system with localized enrichments of Mn, Zn, and Cu in the fourth sample. The combined results demonstrate that slag composition strongly reflects steel grade and fluxing practice. The integration of XRF and SEM–EDS provides a robust framework for linking bulk chemistry with phase distribution, improving slag classification and supporting informed decisions for reuse and environmental management.

Zitieren

APA

Sayfidinov, O., Tan, S., Mardonov, B., Sayfidinova, M., & Kumar, B. (2026). Multi-Scale Characterization of Industrial Steel Slags Using XRF and SEM–EDS Phase Mapping. Crystals, 16(4), 246. https://doi.org/10.3390/cryst16040246

Vancouver

Sayfidinov O, Tan S, Mardonov B, Sayfidinova M, Kumar B. Multi-Scale Characterization of Industrial Steel Slags Using XRF and SEM–EDS Phase Mapping. Crystals. 2026;16(4):246. doi:10.3390/cryst16040246

BibTeX
@article{Sayfidinov2026,
  author = {Sayfidinov, Okhunjon and Tan, Susheng and Mardonov, Bakhtiyor and Sayfidinova, Makhliyo and Kumar, Baibhaw},
  title = {Multi-Scale Characterization of Industrial Steel Slags Using XRF and SEM–EDS Phase Mapping},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {4},
  pages = {246},
  doi = {10.3390/cryst16040246}
}
Kostenlos starten →