Aqueous mineral carbonation of three different industrial steel slags: Absorption capacities and product characterization
Environmental Research · 2024-07 · 252 · 118903
DOI: 10.1016/j.envres.2024.118903 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Research, 2024-07. Verfasst von Emmanouela Leventaki und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Chemical Engineering, Chalmers University of Technology, 412 96 Gothenburg, Sweden. Hauptthemen laut MEDLINE: Steel, Industrial Waste. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carl Tryggers Stiftelse for Vetenskaplig Forskning, Energimyndigheten.
Abstract (Originalsprache)
Heavy carbon industries produce solid side stream materials that contain inorganic chemicals like Ca, Na, or Mg, and other metals such as Fe or Al. These inorganic compounds usually react efficiently with CO2 to form stable carbonates. Therefore, using these side streams instead of virgin chemicals to capture CO2 is an appealing approach to reduce CO2 emissions. Herein, we performed an experimental study of the mineral carbonation potential of three industrial steel slags via aqueous, direct carbonation. To this end, we studied the absorption capacities, reaction yields, and physicochemical characteristics of the carbonated samples. The absorption capacities and the reaction yields were analyzed through experiments carried out in a reactor specifically designed to work without external stirring. As for the physicochemical characterization, we used solid-state Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Using this reactor, the absorption capacities were between 5.8 and 35.3 g/L and reaction yields were in the range of 81-211 kg CO2/ton of slag. The physicochemical characterization of the solid products with solid FTIR, XRD and SEM indicated the presence of CaCO3. This suggests that there is potential to use the carbonated products in commercial applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemistry and Chemical Engineering, Chalmers University of Technology, 412 96 Gothenburg, Sweden.
- Höganäs Sweden AB, Bruksgatan 34-35, 263 39, Höganäs, Sweden.
- Department of Chemistry and Chemical Engineering, Chalmers University of Technology, 412 96 Gothenburg, Sweden. Electronic address: francisco.baena@chalmers.se.
- LQBin - Laboratório de Química BioInorgânica, Chemistry Department, Institute of Exact Sciences, Federal University of Juiz de Fora - UFJF, Juiz de Fora, MG, 36036-330, Brazil.
- Department of Chemistry and Chemical Engineering, Chalmers University of Technology, 412 96 Gothenburg, Sweden. Electronic address: diana.bernin@chalmers.se.
Förderung
- Carl Tryggers Stiftelse for Vetenskaplig Forskning
- Energimyndigheten
Zitieren
APA
Leventaki, E., Couto Queiroz, E., Krishnan Pisharody, S., Kumar Siva Kumar, A., Hoang Ho, P., Andersson-Sarning, M., Haase, B., Baena-Moreno, F. M., Cuin, A., & Bernin, D. (2024). Aqueous mineral carbonation of three different industrial steel slags: Absorption capacities and product characterization. Environmental Research, 252, 118903. https://doi.org/10.1016/j.envres.2024.118903
Vancouver
Leventaki E, Couto Queiroz E, Krishnan Pisharody S, Kumar Siva Kumar A, Hoang Ho P, Andersson-Sarning M, et al. Aqueous mineral carbonation of three different industrial steel slags: Absorption capacities and product characterization. Environmental Research. 2024;252:118903. doi:10.1016/j.envres.2024.118903
BibTeX
@article{Leventaki2024,
author = {Leventaki, Emmanouela and Couto Queiroz, Eduarda and Krishnan Pisharody, Shyam and Kumar Siva Kumar, Amit and Hoang Ho, Phuoc and Andersson-Sarning, Michael and Haase, Björn and Baena-Moreno, Francisco M and Cuin, Alexandre and Bernin, Diana},
title = {Aqueous mineral carbonation of three different industrial steel slags: Absorption capacities and product characterization},
journal = {Environmental Research},
year = {2024},
volume = {252},
pages = {118903},
doi = {10.1016/j.envres.2024.118903}
}
EUVIMED