EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Lapping Parameters on Material Removal Rate and Surface Roughness of GaN (0001) Plane

Hao Zhou, Yongliang Shao, Baoguo Zhang, Haixiao Hu, Yongzhong Wu, Xiaopeng Hao

Crystals · 11.03.2026 · 16 (3) · 190

DOI: 10.3390/cryst16030190 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 11.03.2026. Verfasst von Hao Zhou und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSFC, Qilu University of Technology (Shandong Academy of Sciences) Science, the Taishan Scholar Program of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a critical pretreatment process for chemical and mechanical polishing (CMP), the lapping roughness of gallium nitride (GaN) crystals directly influences the outcome of subsequent polishing and the reliability of final devices. This study systematically investigates the key factors affecting the lapping performance of GaN single crystals, focusing on abrasive type, particle size, and spindle speed, and elucidates their mechanisms in regulating material removal rate (MRR) and surface roughness. Using a micro-thickness gauge and controlled variable method, the material removal depth of the (0001) plane of GaN was accurately measured. The results show that the MRR increases with the increase in abrasive particle size within a certain range, albeit at the cost of increased surface roughness. Meanwhile, the spindle speed and MRR exhibit a positive correlation under specific conditions. Considering these lapping parameters, a balance between high MRR and controlled roughness can be achieved, providing a technical foundation for efficient and precise lapping of GaN crystals and facilitating the fabrication of GaN-based devices.

Förderung

  • NSFC
  • Qilu University of Technology (Shandong Academy of Sciences) Science
  • the Taishan Scholar Program of Shandong Province

Zitieren

APA

Zhou, H., Shao, Y., Zhang, B., Hu, H., Wu, Y., & Hao, X. (2026). Effect of Lapping Parameters on Material Removal Rate and Surface Roughness of GaN (0001) Plane. Crystals, 16(3), 190. https://doi.org/10.3390/cryst16030190

Vancouver

Zhou H, Shao Y, Zhang B, Hu H, Wu Y, Hao X. Effect of Lapping Parameters on Material Removal Rate and Surface Roughness of GaN (0001) Plane. Crystals. 2026;16(3):190. doi:10.3390/cryst16030190

BibTeX
@article{Zhou2026,
  author = {Zhou, Hao and Shao, Yongliang and Zhang, Baoguo and Hu, Haixiao and Wu, Yongzhong and Hao, Xiaopeng},
  title = {Effect of Lapping Parameters on Material Removal Rate and Surface Roughness of GaN (0001) Plane},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {190},
  doi = {10.3390/cryst16030190}
}
Kostenlos starten →