EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influences of Polishing Slurry Components on Material Removal and Surface Morphology of 4H-SiC C-Face Based on Fenton Reaction CMP

Ying Wei, Ruhao Meng, Yongqi Huang, Guoyan Huo, Haitao Wu, Jiapeng Chen, Guizhong Guo, Yanan Peng, Nannan Zhu, Jianxiu Su

Crystals · 06.03.2026 · 16 (3) · 179

DOI: 10.3390/cryst16030179 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 06.03.2026. Verfasst von Ying Wei und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shanghai, Key Science and Technology Plan Project of Jinhua City.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigates the effects of polishing slurry components on the material removal rate (MRR) and surface morphology of the C-face of 4H-SiC substrates during chemical mechanical polishing (CMP) based on the Fenton reaction. By regulating the particle size and concentration of colloidal silica abrasives, H2O2 concentration, and Fe3O4 catalyst content, the mechanisms of each component on MRR and surface roughness (Sa) were systematically analyzed. The results indicate that in an alkaline polishing slurry at pH = 9, Fe3O4 effectively catalyzes the decomposition of H2O2 to generate hydroxyl radicals (·OH), thereby significantly enhancing the material removal efficiency. When using colloidal silica with a particle size of 110 nm at a concentration of 8 wt%, H2O2 at 5 wt%, and Fe3O4 at 0.03 wt%, a maximum MRR of 701 nm/h was achieved along with a good surface quality of Sa = 0.79 nm. The study also found that the abrasive particle size and concentration, as well as the ratio of oxidant to catalyst, significantly influence the chemo-mechanical synergy. Excessively high H2O2 or Fe3O4 concentrations can trigger ·OH quenching reactions, thereby reducing polishing efficiency. This research provides a theoretical basis and process optimization direction for the application of heterogeneous Fenton reactions in SiC CMP under alkaline conditions.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shanghai
  • Key Science and Technology Plan Project of Jinhua City
  • Henan Provincial Science and Technology R&D Plan Joint Fund
  • Natural Science Foundation of Henan Province of China
  • Science and Technology Tackling Key Issues Project in Henan Province

Zitieren

APA

Wei, Y., Meng, R., Huang, Y., Huo, G., Wu, H., Chen, J., Guo, G., Peng, Y., Zhu, N., & Su, J. (2026). Influences of Polishing Slurry Components on Material Removal and Surface Morphology of 4H-SiC C-Face Based on Fenton Reaction CMP. Crystals, 16(3), 179. https://doi.org/10.3390/cryst16030179

Vancouver

Wei Y, Meng R, Huang Y, Huo G, Wu H, Chen J, et al. Influences of Polishing Slurry Components on Material Removal and Surface Morphology of 4H-SiC C-Face Based on Fenton Reaction CMP. Crystals. 2026;16(3):179. doi:10.3390/cryst16030179

BibTeX
@article{Wei2026,
  author = {Wei, Ying and Meng, Ruhao and Huang, Yongqi and Huo, Guoyan and Wu, Haitao and Chen, Jiapeng and Guo, Guizhong and Peng, Yanan and Zhu, Nannan and Su, Jianxiu},
  title = {Influences of Polishing Slurry Components on Material Removal and Surface Morphology of 4H-SiC C-Face Based on Fenton Reaction CMP},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {179},
  doi = {10.3390/cryst16030179}
}
Kostenlos starten →