EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wood-Derived Graphite: A Sustainable and Cost-Effective Material for the Wide Range of Industrial Applications

Young Soon Kim, Md. Abu Hanif, Hyeonjin Song, Sungeun Kim, Yonu Cho, Seung-Kon Ryu, Hong Gun Kim

Crystals · 27.03.2024 · 14 (4) · 309

DOI: 10.3390/cryst14040309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 27.03.2024. Verfasst von Young Soon Kim und 6 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation (Ministry of Education), National Research Foundation of Korea (NRF).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study explored the graphitization of wood through two distinct methods: a high-temperature approach at 2400 °C and a low-temperature technique at 1400 °C using a catalyst. The graphitization properties were assessed by conducting thermal experiments at various temperatures (1100 °C, 1400 °C, 1800 °C, 2000 °C, and 2400 °C), both with and without a catalyst. The development of graphite lattices was quantitatively analyzed using an array of techniques: X-ray diffractometer (XRD), Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), and Fourier transform infrared spectroscopy (FTIR). The XRD analysis highlighted temperature-dependent changes in lattice parameters (d002, La, and Lc), while Raman spectroscopy tracked alterations in the D to G peak ratio (D/G) with temperature. An increase in temperature is correlated with a rise in the number of graphene layers and the degree of graphitization. Notably, the process of graphite lattice formation varied across the experimental temperature spectrum. The use of a catalyst resulted in a reduced d002 spacing, signifying an enhanced degree of graphitization. Moreover, the catalyst promoted a consistent and smooth graphitization process throughout the heating stages. In contrast, graphitization without a catalyst occurred at higher temperatures, specifically between 1800 °C and 2000 °C, with the d002 value stabilizing around 0.338 nm. The catalyst proved instrumental in transforming the initial structure into well-ordered graphite at lower temperatures. This investigation underscores the potential and benefits of employing a catalyst to generate high-quality graphite from wood at reduced temperatures, paving the way for sustainable and economically viable applications of this material.

Förderung

  • National Research Foundation (Ministry of Education)
  • National Research Foundation of Korea (NRF)

Zitieren

APA

Kim, Y. S., Hanif, M. A., Song, H., Kim, S., Cho, Y., Ryu, S., & Kim, H. G. (2024). Wood-Derived Graphite: A Sustainable and Cost-Effective Material for the Wide Range of Industrial Applications. Crystals, 14(4), 309. https://doi.org/10.3390/cryst14040309

Vancouver

Kim YS, Hanif MA, Song H, Kim S, Cho Y, Ryu S, et al. Wood-Derived Graphite: A Sustainable and Cost-Effective Material for the Wide Range of Industrial Applications. Crystals. 2024;14(4):309. doi:10.3390/cryst14040309

BibTeX
@article{Kim2024,
  author = {Kim, Young Soon and Hanif, Md. Abu and Song, Hyeonjin and Kim, Sungeun and Cho, Yonu and Ryu, Seung-Kon and Kim, Hong Gun},
  title = {Wood-Derived Graphite: A Sustainable and Cost-Effective Material for the Wide Range of Industrial Applications},
  journal = {Crystals},
  year = {2024},
  volume = {14},
  number = {4},
  pages = {309},
  doi = {10.3390/cryst14040309}
}
Kostenlos starten →