Biomass-derived Graphite-like Carbon as a Sustainable Cathode Material for Lithium Oxygen Batteries
Materials · 31.10.2026 · 19 (21) · 4632
DOI: 10.3390/ma19214632 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2026. Verfasst von Da-Jung Kang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center of Bio-Resources Recycling, Institute for Advanced Engineering, Yongin 17180, Republic of Korea. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Institute of Advanced Engineering (IAE) internal R&D program, Institute of Advanced Engineering (IAE) internal R&D program.
Abstract (Originalsprache)
Lithium–oxygen batteries (LOBs) offer the highest theoretical specific energy among metal–air chemistries, but their practical deployment is limited by the sluggish reversibility of Li2O2 formation/decomposition on the cathode, which requires a porous, electronically conductive carbon combining mesoporous transport with graphitic domains. Here, we report a two-step, KOH-assisted thermal treatment route for producing graphite-like porous carbon that converts spent mushroom substrate (SMS)—a lignin-rich agro-industrial waste generated at >5 million tonnes per year in East Asia—into a graphite-like porous carbon (G-SMS) for LOB cathodes. SMS derived from Pleurotus ostreatus cultivated on an oak–sawdust substrate was carbonized at 800 °C (1 h, 3 °C min−1), followed by KOH-assisted heat treatment at 1200–1800 °C. A KOH/C ratio of 0.5 was selected for the detailed graphitization series for its reagent economy and carbon yield: the 1.0 ratio gave ~10 wt% lower production yield and, at 1800 °C, lower carbon content (97.6 wt%) with residual ash (1.7 wt%), for no compensating benefit. Within the KOH/C = 0.5 series, G-SMS-1800/0.5 combined the smallest interlayer spacing (d002 = 0.347 nm), the lowest Raman I_D/I_G (0.69), the largest mesopore fraction (96.9%) and mesopore volume (0.31 cm3 g−1), and the highest powder conductivity (8607 S m−1 at 2000 kgf), giving the highest mesopore-volume-weighted conductivity descriptor of the matrix, V_Meso × σ = 2668 cm3 g−1 S m−1. This sample was identified as the most robust host, and its cycling stability was benchmarked against Super P in a modified CR2032 LOB cell (1 M LiTFSI in N,N-dimethylacetamide, 2.0 atm O2): G-SMS-1800/0.5 sustained 330 cycles, whereas Super P reached only 200 cycles under identical conditions, a ~1.65-fold improvement. KOH-mediated catalytic graphitization thus lowers the thermal budget of biomass graphitization while providing a conductive, mesopore-dominated host for Li2O2 deposition, providing a potential route for the valorization of spent mushroom substrate into graphite-like porous carbon for LOB cathodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center of Bio-Resources Recycling, Institute for Advanced Engineering, Yongin 17180, Republic of Korea.
- Center of Materials Science and Chemical Engineering, Institute for Advanced Engineering, Yongin 17180, Republic of Korea.
- Interior Materials Development Team, Hyundai Motor Group, 150, Hyundaiyeonguso-Ro, Namyang-Eup, Manse-Gu, Hwaseong-Si 18280, Republic of Korea.
ORCID-Profile: Cheol-Hui Ryu, Kwang-Mo Seong, Jung-Eun Park
Förderung
- the Institute of Advanced Engineering (IAE) internal R&D program
- Institute of Advanced Engineering (IAE) internal R&D program
Zitieren
APA
Kang, D. J., Ryu, C. H., Lee, G. H., Seong, K. M., & Park, J. E. (2026). Biomass-derived Graphite-like Carbon as a Sustainable Cathode Material for Lithium Oxygen Batteries. Materials, 19(21), 4632. https://doi.org/10.3390/ma19214632
Vancouver
Kang DJ, Ryu CH, Lee GH, Seong KM, Park JE. Biomass-derived Graphite-like Carbon as a Sustainable Cathode Material for Lithium Oxygen Batteries. Materials. 2026;19(21):4632. doi:10.3390/ma19214632
BibTeX
@article{Kang2026,
author = {Kang, Da-Jung and Ryu, Cheol-Hui and Lee, Gwang-Hee and Seong, Kwang-Mo and Park, Jung-Eun},
title = {Biomass-derived Graphite-like Carbon as a Sustainable Cathode Material for Lithium Oxygen Batteries},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4632},
doi = {10.3390/ma19214632}
}
EUVIMED