EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Machining of Nickel Oxide–Yttria Stabilized Zirconia Composite for Surface Modification in Solid Oxide Fuel Cells

Miguel Morales, Sandra García-González, Michaela Plch, Dario Montinaro, Emilio Jiménez-Piqué

Crystals · 26.06.2023 · 13 (7) · 1016

DOI: 10.3390/cryst13071016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 26.06.2023. Verfasst von Miguel Morales und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Administration of University and Research (Agència de Gestió d’Ajuts Universitaris i de Recerca), Serra Húnter program (Generalitat de Catalunya).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser machining of the nickel oxide–yttria-stabilized zirconia (NiO–YSZ) composite in Solid Oxide Fuel Cells (SOFCs) may be an effective approach to enlarge the electrode–electrolyte interface and improve the cell performance. However, laser energy can cause thermal damage to the composite surface during the machined operation. In this work, the microstructure changes and the collateral damage caused by pulsed laser machining on the sintered NiO–YSZ of the state-of-the-art SOFCs were evaluated using complementary analysis techniques. Laser patterns consisting of parallel tracks on sintered NiO–YSZ were processed, varying the laser parameters such as frequency and laser beam energy density. The analyses evidenced a heat-affected zone (HAZ) limited to around 2 µm with microcracking, porosity reduction, and recrystallization. The changes in chemical composition, phase transformation of YSZ and mechanical properties at the machined surface were quite limited.

Förderung

  • Administration of University and Research (Agència de Gestió d’Ajuts Universitaris i de Recerca)
  • Serra Húnter program (Generalitat de Catalunya)

Zitieren

APA

Morales, M., García-González, S., Plch, M., Montinaro, D., & Jiménez-Piqué, E. (2023). Laser Machining of Nickel Oxide–Yttria Stabilized Zirconia Composite for Surface Modification in Solid Oxide Fuel Cells. Crystals, 13(7), 1016. https://doi.org/10.3390/cryst13071016

Vancouver

Morales M, García-González S, Plch M, Montinaro D, Jiménez-Piqué E. Laser Machining of Nickel Oxide–Yttria Stabilized Zirconia Composite for Surface Modification in Solid Oxide Fuel Cells. Crystals. 2023;13(7):1016. doi:10.3390/cryst13071016

BibTeX
@article{Morales2023,
  author = {Morales, Miguel and García-González, Sandra and Plch, Michaela and Montinaro, Dario and Jiménez-Piqué, Emilio},
  title = {Laser Machining of Nickel Oxide–Yttria Stabilized Zirconia Composite for Surface Modification in Solid Oxide Fuel Cells},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {1016},
  doi = {10.3390/cryst13071016}
}
Kostenlos starten →