EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Postsynthetic modification of yttria‐stabilized zirconia aerogels with silica coatings for enhanced thermal stability

Nathaniel S. Olson, Jamesa L. Stokes, Haiquan Guo, Frances I. Hurwitz, Richard B. Rogers, Nachiket Shah, Jessica A. Krogstad

Journal of the American Ceramic Society · 2024-09 · 107 (9) · 6353-6368

DOI: 10.1111/jace.19876 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 15.05.2024. Verfasst von Nathaniel S. Olson und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Maintaining high surface area and porosity at high temperatures is important when considering aerogels for use in thermal management systems. The mesoporous structure of aerogels results in extremely low thermal conductivity, making them lightweight, high performance insulating materials. Maintaining these properties requires innovative routes to suppress sintering and pore collapse as use temperatures rise. The current work aims to improve the pore structure stability of yttria‐stabilized zirconia aerogels by the addition of a SiO 2 coating. The functionalization of surface hydroxyl groups by the addition of SiO 2 is hypothesized to mitigate condensation reactions, which are a driving force for shrinkage and pore structure collapse. Zirconia aerogels with 0, 10, and 30 mol% yttria (YO 1.5 ) additions were coated in a tetraethyl orthosilicate (TEOS) solution and exposed to temperatures up to 1200°C. Crystal structure, pore structure, and aerogel morphology were investigated to understand changes in aerogel thermal stability. The SiO 2 coating exhibited a greater influence on pore stability over yttria concentration, with specific surface area of the coated aerogels being twice that of the uncoated aerogels up to 1000°C. However, the presence of the SiO 2 coating promoted rapid sintering and densification at 1200°C, establishing an upper use temperature for SiO 2 and a need to develop other coating chemistries.

Zitieren

APA

Olson, N. S., Stokes, J. L., Guo, H., Hurwitz, F. I., Rogers, R. B., Shah, N., & Krogstad, J. A. (2024). Postsynthetic modification of yttria‐stabilized zirconia aerogels with silica coatings for enhanced thermal stability. Journal of the American Ceramic Society, 107(9), 6353-6368. https://doi.org/10.1111/jace.19876

Vancouver

Olson NS, Stokes JL, Guo H, Hurwitz FI, Rogers RB, Shah N, et al. Postsynthetic modification of yttria‐stabilized zirconia aerogels with silica coatings for enhanced thermal stability. Journal of the American Ceramic Society. 2024;107(9):6353-6368. doi:10.1111/jace.19876

BibTeX
@article{Olson2024,
  author = {Olson, Nathaniel S. and Stokes, Jamesa L. and Guo, Haiquan and Hurwitz, Frances I. and Rogers, Richard B. and Shah, Nachiket and Krogstad, Jessica A.},
  title = {Postsynthetic modification of yttria‐stabilized zirconia aerogels with silica coatings for enhanced thermal stability},
  journal = {Journal of the American Ceramic Society},
  year = {2024},
  volume = {107},
  number = {9},
  pages = {6353--6368},
  doi = {10.1111/jace.19876}
}
Kostenlos starten →