Detection of Porosity in Impregnated Die-Cast Aluminum Alloy Piece by Metallography and Computer Tomography
Crystals · 26.06.2023 · 13 (7) · 1014
DOI: 10.3390/cryst13071014 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 26.06.2023. Verfasst von Mihály Réger und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2019-1.1.1-Market KFI-2019-00462 project, UNKP-22-3 New National Excellence Program of the Ministry of Human Capacities, Hungary.
Abstract (Originalsprache)
The porosity of die-cast aluminum alloys is a determining factor for the quality of the product. In this paper, we studied the porosity of a selected part of a die-cast AlSi9Cu3(Fe) compressor part by computer tomography and metallography. In the case of this part, the achievable resolution by CT, a non-destructive testing method, was 30 μm—this method could not detect smaller cavities. Based on metallographic analysis, the percentage of defects larger than 30 μm ranges from 10 to 30% of the total number of defects, which represents 75–95% of the defective area (area ratio). Impregnation with methacrylate resin (used to seal cavities to prevent leakage) can be detected with UV-illuminated optical microscopic examination on metallographically prepared specimens. As confirmed by scanning electron microscopy, partial filling and partial impregnation can occur in a system of shrinkage cavities.
Förderung
- 2019-1.1.1-Market KFI-2019-00462 project
- UNKP-22-3 New National Excellence Program of the Ministry of Human Capacities, Hungary
Zitieren
APA
Réger, M., Gáti, J., Oláh, F., Horváth, R., Fábián, E. R., & Bubonyi, T. (2023). Detection of Porosity in Impregnated Die-Cast Aluminum Alloy Piece by Metallography and Computer Tomography. Crystals, 13(7), 1014. https://doi.org/10.3390/cryst13071014
Vancouver
Réger M, Gáti J, Oláh F, Horváth R, Fábián ER, Bubonyi T. Detection of Porosity in Impregnated Die-Cast Aluminum Alloy Piece by Metallography and Computer Tomography. Crystals. 2023;13(7):1014. doi:10.3390/cryst13071014
BibTeX
@article{Rger2023,
author = {Réger, Mihály and Gáti, József and Oláh, Ferenc and Horváth, Richárd and Fábián, Enikő Réka and Bubonyi, Tamás},
title = {Detection of Porosity in Impregnated Die-Cast Aluminum Alloy Piece by Metallography and Computer Tomography},
journal = {Crystals},
year = {2023},
volume = {13},
number = {7},
pages = {1014},
doi = {10.3390/cryst13071014}
}
EUVIMED