Analysis of Porosity in Aluminum Alloy (AlSi10Mg) Using Tomographic Image Processing
Journal of Manufacturing and Materials Processing · 14.11.2025 · 9 (11) · 374
DOI: 10.3390/jmmp9110374 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 14.11.2025. Verfasst von Edwin G. Castro Rodas und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work is partially supported by “El Patrimonio Autónomo Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación Francisco José de C….
Abstract (Originalsprache)
Porosity characterization in metallic alloys is a fundamental aspect of materials engineering due to its influence on mechanical and structural properties. This study presents a method based on digital image processing for detecting and analyzing porosity in the AlSi10Mg aluminum alloy, additively manufactured using laser powder bed fusion (L-PBF). X-ray computed tomography, segmentation algorithms and filtering techniques were employed to identify and quantify the porosity present in the material’s microstructure. The research demonstrates that combining numerical methods with qualitative analysis provides a comprehensive understanding of porosity characteristics. Notably, the effectiveness of the proposed image processing methods was validated by comparing the results with actual material density measurements. However, challenges such as the need for proper calibration and potential imaging artifacts affecting accuracy were identified. This study represents a significant advancement in materials engineering, offering a detailed methodology for porosity analysis in aluminum alloys that not only enhances quality control and process optimization, but also improves segmentation accuracy and facilitates the reliable detection of small and interconnected pores in complex additively manufactured geometries.
Förderung
- This work is partially supported by “El Patrimonio Autónomo Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación Francisco José de C…
Zitieren
APA
Rodas, E. G. C., Diaz, J. C. B., Ortega-Portilla, C., Gómez-Ortega, A., Piamba, J. F., Salazar, D., & Forero, M. G. (2025). Analysis of Porosity in Aluminum Alloy (AlSi10Mg) Using Tomographic Image Processing. Journal of Manufacturing and Materials Processing, 9(11), 374. https://doi.org/10.3390/jmmp9110374
Vancouver
Rodas EGC, Diaz JCB, Ortega-Portilla C, Gómez-Ortega A, Piamba JF, Salazar D, et al. Analysis of Porosity in Aluminum Alloy (AlSi10Mg) Using Tomographic Image Processing. Journal of Manufacturing and Materials Processing. 2025;9(11):374. doi:10.3390/jmmp9110374
BibTeX
@article{Rodas2025,
author = {Rodas, Edwin G. Castro and Diaz, Juan C. Buitrago and Ortega-Portilla, Carolina and Gómez-Ortega, Arturo and Piamba, Jeferson Fernando and Salazar, Daniel and Forero, Manuel G.},
title = {Analysis of Porosity in Aluminum Alloy (AlSi10Mg) Using Tomographic Image Processing},
journal = {Journal of Manufacturing and Materials Processing},
year = {2025},
volume = {9},
number = {11},
pages = {374},
doi = {10.3390/jmmp9110374}
}
EUVIMED