EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace

Mile Djurdjevic, Srecko Manasijevic, Slavko Smiljanic, Marko Ristic

Crystals · 21.01.2023 · 13 (2) · 191

DOI: 10.3390/cryst13020191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 21.01.2023. Verfasst von Mile Djurdjevic und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Strontium (Sr) and sodium (Na) are the most used modifiers in the aluminum casting industry. Both lose their concentration (fade) during holding in the melting furnace. Three types of chemical reactions in the melt may cause modifier fading: vaporizing, oxidizing, or reacting with some other elements from the melt. Due to Na and Sr’s very low vapor pressure, their vaporization from the aluminum melt was excluded as a reason for the modifiers’ fading. Oxidation looks like the major chemical reaction that causes the fading of Na and Sr from an aluminum melt. The present paper aimed to quantify the fading of Na and Sr in an Al–Si–Cu–Mg alloy. The loss of modifiers (Na and Sr) during melt holding in a furnace can be analytically quantified using equations taken from the literature. The calculated surface reaction rate constant (ks) can estimate the modifier’s loss during melt holding in industrial and laboratory furnaces.

Förderung

  • Ministry of Science

Zitieren

APA

Djurdjevic, M., Manasijevic, S., Smiljanic, S., & Ristic, M. (2023). Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace. Crystals, 13(2), 191. https://doi.org/10.3390/cryst13020191

Vancouver

Djurdjevic M, Manasijevic S, Smiljanic S, Ristic M. Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace. Crystals. 2023;13(2):191. doi:10.3390/cryst13020191

BibTeX
@article{Djurdjevic2023,
  author = {Djurdjevic, Mile and Manasijevic, Srecko and Smiljanic, Slavko and Ristic, Marko},
  title = {Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {191},
  doi = {10.3390/cryst13020191}
}
Kostenlos starten →