STUDIES AND RESEARCH ON DEFECTS THAT OCCUR DURING THE CASTING OF ALUMINUM ALLOY 7000
Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering · 2026 · 40 (1) · 43-48
DOI: 10.37193/sbsd.2026.1.04 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering, 2026. Verfasst von Jozsef Juhasz. Die Arbeit nennt 9 Literaturangaben.
Abstract (Originalsprache)
This paper aims to address the subject of defects that can occur when casting aluminum bars. This subject is specific to the aeronautical industry, when casting aluminum alloy 7000 into bars up to 6 meters long. These aluminum bars are then processed into specific alloys, such as aluminum alloys 7075, 7050 or the new alloy 7055. The 7075 alloy is the best known and most widely used in this series. The 7050 alloy is specifically developed to provide higher corrosion resistance and better fracture toughness in thick sections compared to 7075. The 7055 alloy is a newer generation alloy, optimized to provide even higher compressive and tensile strengths (approximately 10% higher than 7075), widely used in modern high-capacity commercial aircraft (e.g. high-strength wing structures) [1].
Zitieren
APA
Juhasz, J. (2026). STUDIES AND RESEARCH ON DEFECTS THAT OCCUR DURING THE CASTING OF ALUMINUM ALLOY 7000. Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering, 40(1), 43-48. https://doi.org/10.37193/sbsd.2026.1.04
Vancouver
Juhasz J. STUDIES AND RESEARCH ON DEFECTS THAT OCCUR DURING THE CASTING OF ALUMINUM ALLOY 7000. Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering. 2026;40(1):43-48. doi:10.37193/sbsd.2026.1.04
BibTeX
@article{Juhasz2026,
author = {Juhasz, Jozsef},
title = {STUDIES AND RESEARCH ON DEFECTS THAT OCCUR DURING THE CASTING OF ALUMINUM ALLOY 7000},
journal = {Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering},
year = {2026},
volume = {40},
number = {1},
pages = {43--48},
doi = {10.37193/sbsd.2026.1.04}
}
EUVIMED