EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood

Halil Ibrahim Karagoz, Onur Ulker, Betul Gelengul Ekimci, Haci İsmail Kesik, Mehmet Inceoglu

Coatings · 19.11.2026 · 16 (11) · 1378

DOI: 10.3390/coatings16111378 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 19.11.2026. Verfasst von Halil Ibrahim Karagoz und 4 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Eskişehir Technical University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study comparatively investigated the effects of disodium octaborate tetrahydrate (DOT) and silicate-modified resin impregnation systems on the physical and mechanical properties of fresh and naturally aged (historical) Crimean pine (Pinus nigra Arnold) and Scots pine (Pinus sylvestris L.). Wood specimens were treated with aqueous DOT solutions at concentrations of 5%, 10%, and 15% (w/v), either alone or in combination with silicate-modified resin. Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), and compression strength parallel to the grain were evaluated. Statistical analyses revealed significant effects of wood type and impregnation formulation on the investigated properties (p < 0.001). Historical pine specimens generally exhibited lower bending and compressive strength than fresh specimens, whereas historical Crimean pine retained a relatively high MOE (10,290.97 N/mm2) compared with fresh Crimean pine (9809.54 N/mm2). Impregnation treatments increased mean air-dry density from 0.496 g/cm3 in untreated specimens to 0.600 g/cm3 with R-DOT 15, corresponding to an increase of approximately 21.0%. Resin-containing treatments significantly improved bending performance compared with untreated and DOT-only specimens. The R-DOT 5 formulation exhibited the highest numerical MOR (109.56 N/mm2) and MOE (12,427.25 N/mm2), representing increases of 44.9% and 41.8%, respectively, compared with untreated controls. However, no statistically significant differences were observed among resin-containing formulations, indicating that DOT addition did not provide a distinguishable additional improvement in bending performance compared with resin treatment alone. The highest mean compression strength was also recorded for R-DOT 5 (41.44 N/mm2), corresponding to a 20.6% increase over the untreated control (34.36 N/mm2). A significant interaction between wood type and impregnation formulation was observed for compression strength (p = 0.021), indicating species-dependent treatment responses. Overall, the findings demonstrate the potential of silicate-modified resin-based treatments to improve the mechanical performance of fresh and historical pine wood, providing experimental evidence relevant to developing wood-strengthening strategies for architectural conservation.

Förderung

  • Eskişehir Technical University

Zitieren

APA

Karagoz, H. I., Ulker, O., Ekimci, B. G., Kesik, H. İ., & Inceoglu, M. (2026). Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood. Coatings, 16(11), 1378. https://doi.org/10.3390/coatings16111378

Vancouver

Karagoz HI, Ulker O, Ekimci BG, Kesik Hİ, Inceoglu M. Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood. Coatings. 2026;16(11):1378. doi:10.3390/coatings16111378

BibTeX
@article{Karagoz2026,
  author = {Karagoz, Halil Ibrahim and Ulker, Onur and Ekimci, Betul Gelengul and Kesik, Haci İsmail and Inceoglu, Mehmet},
  title = {Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1378},
  doi = {10.3390/coatings16111378}
}
Kostenlos starten →