Hybrid Graphene Nanoplatelet/C60 Nanocomposite Modification of HVOF-Metallized Carbon Fiber-Reinforced Polymer Coatings to Improve Adhesion, Barrier Performance, and Surface Functionality
Coatings · 28.07.2026 · 16 (8) · 900
DOI: 10.3390/coatings16080900 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 28.07.2026. Verfasst von Iram Riaz und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: USDOTs.
Abstract (Originalsprache)
Thermally sprayed metallic coatings on carbon fiber-reinforced polymer (CFRP) substrates often contain pores and microstructural defects that can reduce adhesion, durability, and protective performance. In this study, a hybrid graphene nanoplatelet (GNP)-fullerene C60 reinforced epoxy coating was applied to HVOF-metallized CFRP, while a carbon nanotube (CNT)-based surface treatment was used to modify surface wettability. Micro-CT and SEM analyses indicated morphological changes consistent with partial coverage of accessible surface-connected defects and modification of the metallized layer surface. Pull-off adhesion strength increased from 320 psi to 650 psi, accompanied by a shift from adhesive to cohesive failure. The optimal nanofiller formulation improved tensile strength from approximately 25 MPa to 56 MPa (124%) and Young’s modulus by approximately 47% compared with neat epoxy. Abrasion testing showed more than 50% reduction in mass loss, and electrochemical impedance spectroscopy indicated improved barrier performance after 200 h of salt spray exposure. CNT surface modification transformed the coating from hydrophilic to superhydrophobic behavior, achieving water contact angles above 155°, delaying ice formation, and reducing ice accumulation. These results indicate that combining hybrid nanocomposite coatings with CNT functionalization can improve mechanical, protective, and surface-functional performance of HVOF-metallized CFRP systems under the laboratory conditions investigated.
Förderung
- USDOTs
Zitieren
APA
Riaz, I., Wang, X., Pan, H., & Lin, Z. (2026). Hybrid Graphene Nanoplatelet/C60 Nanocomposite Modification of HVOF-Metallized Carbon Fiber-Reinforced Polymer Coatings to Improve Adhesion, Barrier Performance, and Surface Functionality. Coatings, 16(8), 900. https://doi.org/10.3390/coatings16080900
Vancouver
Riaz I, Wang X, Pan H, Lin Z. Hybrid Graphene Nanoplatelet/C60 Nanocomposite Modification of HVOF-Metallized Carbon Fiber-Reinforced Polymer Coatings to Improve Adhesion, Barrier Performance, and Surface Functionality. Coatings. 2026;16(8):900. doi:10.3390/coatings16080900
BibTeX
@article{Riaz2026,
author = {Riaz, Iram and Wang, Xingyu and Pan, Hong and Lin, Zhibin},
title = {Hybrid Graphene Nanoplatelet/C60 Nanocomposite Modification of HVOF-Metallized Carbon Fiber-Reinforced Polymer Coatings to Improve Adhesion, Barrier Performance, and Surface Functionality},
journal = {Coatings},
year = {2026},
volume = {16},
number = {8},
pages = {900},
doi = {10.3390/coatings16080900}
}
EUVIMED