EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitSystematische ÜbersichtOpen Access · CC BY 4.0

A Systematic Review on Carbon Nanotube- and Graphene Nanoplatelet-Reinforced Plasma-Sprayed Alumina-Based Hybrid Nanocomposite Coatings

Krishna Kant Pandey iD, Ashish Ganvir

ACS Omega · 26.05.2026 · 11 (20) · 29250-29267

DOI: 10.1021/acsomega.6c02497 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift ACS Omega, online erschienen am 13.05.2026. Verfasst von Krishna Kant Pandey und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Materials Engineering (MEMA), University of Turku (UTU), Turku 20014, Finland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 113 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Turku Collegium for Science, Medicine and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) have attracted significant attention as advanced nanomaterial reinforcements for improving the structural and functional performance of ceramic coatings due to their exceptional mechanical strength, thermal stability, and chemical inertness. Among various ceramic matrices, alumina (Al2O3) remains one of the most widely used coating materials for wear, corrosion, and thermal protection applications. However, its inherent brittleness and susceptibility to crack propagation limit its performance in demanding environments. This review presents a comprehensive and critical analysis of CNT- and GNP-reinforced plasma-sprayed Al2O3 hybrid nanocomposite coatings. The emphasis has been given on the underlying process–microstructure–property relationships and metallurgical mechanisms governing their performance. The review systematically examines the influence of these reinforcements on particle melting behavior, splat formation, rapid solidification, and interfacial bonding during plasma spraying. Particular attention is given to splat-level phenomena, where CNTs and GNPs play a critical role in improving splat cohesion, reducing intersplat porosity, and inhibiting crack initiation and propagation through crack-bridging and load-transfer mechanisms. The presence of hybrid CNT–GNP reinforcements has been shown to significantly improve coating hardness, fracture toughness, adhesion strength, wear resistance, and corrosion performance compared to monolithic alumina coatings. The synergistic effect of combining one-dimensional CNTs and two-dimensional GNPs enhances reinforcement efficiency by providing multidirectional load transfer and improved stress distribution within the coating microstructure. Furthermore, the review briefly evaluates the effects of reinforcement dispersion techniques, feedstock preparation, and processing routes on the resulting coating microstructure and properties. This review provides fundamental insights into reinforcement mechanisms and microstructure evolution in CNT- and GNP-reinforced ceramic coatings and establishes a framework for the design and optimization of high-performance hybrid nanocomposite coatings for advanced engineering applications.

Autor:innen und Institutionen

  • Department of Mechanical and Materials Engineering (MEMA), University of Turku (UTU), Turku 20014, Finland.

ORCID-Profile: Krishna Kant Pandey

Förderung

  • Turku Collegium for Science, Medicine and Technology

Zitieren

APA

Pandey, K. K., & Ganvir, A. (2026). A Systematic Review on Carbon Nanotube- and Graphene Nanoplatelet-Reinforced Plasma-Sprayed Alumina-Based Hybrid Nanocomposite Coatings. ACS Omega, 11(20), 29250-29267. https://doi.org/10.1021/acsomega.6c02497

Vancouver

Pandey KK, Ganvir A. A Systematic Review on Carbon Nanotube- and Graphene Nanoplatelet-Reinforced Plasma-Sprayed Alumina-Based Hybrid Nanocomposite Coatings. ACS Omega. 2026;11(20):29250-29267. doi:10.1021/acsomega.6c02497

BibTeX
@article{Pandey2026,
  author = {Pandey, Krishna Kant and Ganvir, Ashish},
  title = {A Systematic Review on Carbon Nanotube- and Graphene Nanoplatelet-Reinforced Plasma-Sprayed Alumina-Based Hybrid Nanocomposite Coatings},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {20},
  pages = {29250--29267},
  doi = {10.1021/acsomega.6c02497}
}
Kostenlos starten →