EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Evaluation of Layered Ni–Co and Ni–Co–Ni Electrodes Modified by Molten–Salt Al Deposition/Dissolution Technique for Electrochemical Applications

Dawid Kutyła, Michihisa Fukumoto, Hiroki Takahashi, Ryuu Takahashi, Katarzyna Skibińska, Piotr Żabiński

Coatings · 04.06.2026 · 16 (6) · 679

DOI: 10.3390/coatings16060679 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 04.06.2026. Verfasst von Dawid Kutyła und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yashima Environment Technology Foundation, AGH University of Krakow.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous bilayer Ni–Co and sandwiched Ni–Co–Ni electrodes were fabricated by combining aqueous electrodeposition with high-temperature molten-salt Al deposition and subsequent electrochemical dissolution in NaCl–KCl–AlF3 melt at 750 °C. The study aimed to determine how the initial layer architecture controls phase evolution, porous structure formation, and hydrogen evolution performance in alkaline media. SEM/EDS and XRD analyses showed that the two electrode designs followed different reaction pathways during molten-salt treatment. In the Ni–Co system, Al reacted predominantly with Co, leading mainly to Co–Al intermetallic formation and, after dissolution, to a highly open coral-like porous network. In contrast, the Ni–Co–Ni architecture promoted mainly Ni–Al phase formation and produced a more compact porous surface with a Ni-rich outer layer. Despite these morphological differences, both layered porous electrodes outperformed untreated Ni and porous Ni in 1 M NaOH. At −0.6 V vs. RHE, porous Ni–Co and NiCo–Ni reached current densities of −162 and −141 mA·cm−2, respectively, compared with −87 mA·cm for porous Ni and −45 mA·cm for flat Ni. The Ni–Co–Ni sandwiched electrode showed the most favourable HER kinetics and benchmark performance, with the lowest Tafel slope (111 mV·dec) and the lowest potentials at −10 and −100 mA·cm (−0.132 and −0.556 V, respectively). These results demonstrate that the electrocatalytic response of molten-salt-derived porous Ni-based electrodes is governed not only by porosity development but also by the spatial arrangement of metallic layers prior to Al infiltration and dealloying.

Förderung

  • Yashima Environment Technology Foundation
  • AGH University of Krakow

Zitieren

APA

Kutyła, D., Fukumoto, M., Takahashi, H., Takahashi, R., Skibińska, K., & Żabiński, P. (2026). Synthesis and Evaluation of Layered Ni–Co and Ni–Co–Ni Electrodes Modified by Molten–Salt Al Deposition/Dissolution Technique for Electrochemical Applications. Coatings, 16(6), 679. https://doi.org/10.3390/coatings16060679

Vancouver

Kutyła D, Fukumoto M, Takahashi H, Takahashi R, Skibińska K, Żabiński P. Synthesis and Evaluation of Layered Ni–Co and Ni–Co–Ni Electrodes Modified by Molten–Salt Al Deposition/Dissolution Technique for Electrochemical Applications. Coatings. 2026;16(6):679. doi:10.3390/coatings16060679

BibTeX
@article{Kutya2026,
  author = {Kutyła, Dawid and Fukumoto, Michihisa and Takahashi, Hiroki and Takahashi, Ryuu and Skibińska, Katarzyna and Żabiński, Piotr},
  title = {Synthesis and Evaluation of Layered Ni–Co and Ni–Co–Ni Electrodes Modified by Molten–Salt Al Deposition/Dissolution Technique for Electrochemical Applications},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {679},
  doi = {10.3390/coatings16060679}
}
Kostenlos starten →