EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Weak Interlayer Interfaces in 3D-Printed Concrete: Formation Mechanisms, Cross-Scale Consequences, and Control Strategies

Rongfei Zhang, Chao Liu, Zhenhua Duan, Zhenyuan Lv, Wei Zhang, Huawei Liu

Coatings · 31.05.2026 · 16 (6) · 660

DOI: 10.3390/coatings16060660 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 31.05.2026. Verfasst von Rongfei Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 188 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qinchuangyuan’s Scientist and Engineer” Team Building of Shanxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D-printed concrete (3DPC) enables formwork-free automated construction with geometric flexibility and improved material efficiency, yet its engineering reliability remains limited by interlayer weakening generated during sequential deposition. This review critically examines the formation, cross-scale consequences, and control of weak interlayer interfaces in 3DPC. In most studies, the 3DPC printing interval ranges from 20 s to 120 min, and the average interfacial bond strength ranges from 0.1 to 16 MPa. Interfacial weakness arises from the asynchronous evolution of adjacent layers in terms of contact quality, rheological recovery, moisture exchange, and early-age hydration. This mismatch promotes pore enrichment, discontinuity of hydration products, reduced phase continuity, and consequent local mechanical softening. These defects govern interlayer bonding, crack propagation, anisotropy, and stress-transfer pathways, and their effects propagate from material properties to member response, structural performance, and durability degradation. Rather than treating the interface as a localized cold joint, this review frames it as a process-induced multiscale variable linking printing history, microstructure, mechanical response, transport behavior, and serviceability. Current research remains constrained by non-comparable testing methods, undefined quantitative thresholds, and models that still rely heavily on empirical calibration. Future work should establish standardized characterization, transferable interface descriptors, multiscale predictive models, real-time quality control, and design methods that explicitly incorporate interfacial variability.

Förderung

  • Qinchuangyuan’s Scientist and Engineer” Team Building of Shanxi Province

Zitieren

APA

Zhang, R., Liu, C., Duan, Z., Lv, Z., Zhang, W., & Liu, H. (2026). Weak Interlayer Interfaces in 3D-Printed Concrete: Formation Mechanisms, Cross-Scale Consequences, and Control Strategies. Coatings, 16(6), 660. https://doi.org/10.3390/coatings16060660

Vancouver

Zhang R, Liu C, Duan Z, Lv Z, Zhang W, Liu H. Weak Interlayer Interfaces in 3D-Printed Concrete: Formation Mechanisms, Cross-Scale Consequences, and Control Strategies. Coatings. 2026;16(6):660. doi:10.3390/coatings16060660

BibTeX
@article{Zhang2026,
  author = {Zhang, Rongfei and Liu, Chao and Duan, Zhenhua and Lv, Zhenyuan and Zhang, Wei and Liu, Huawei},
  title = {Weak Interlayer Interfaces in 3D-Printed Concrete: Formation Mechanisms, Cross-Scale Consequences, and Control Strategies},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {660},
  doi = {10.3390/coatings16060660}
}
Kostenlos starten →