EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Anisotropic Behavior of 3D-Printed Concrete: Interlayer Bonding, Pore Architecture, Reinforcement Limitations, and Durability Mechanisms

Ali Mardani iD, Mohammad Hematibahar iD, Selin Özteber, Qais Abdulrahman Ali Qais iD, Ivan Khalil iD, Tesfaldet Hadgembes Gebre iD, Ahmed Elsheikh iD

Materials · 31.08.2026 · 19 (17) · 3698

DOI: 10.3390/ma19173698 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 31.08.2026. Verfasst von Ali Mardani und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Bursa Uludag University, Bursa 16059, Türkiye. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 126 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bursa Uludağ University Scientific Research Projects Unit (BAP).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The structural use of three-dimensional concrete printing remains limited by the directional weakness introduced during extrusion and layer-by-layer deposition. Although 3DPC offers major advantages in formwork elimination, architectural freedom, and automated construction, its printed architecture produces interfaces, pore networks, and reinforcement discontinuities that do not exist in the same form in conventionally cast concrete. This review examines the anisotropic behavior of 3DPC by linking its architectural arrangement, physical interlayer mechanisms, and chemical durability-related processes. The analysis shows that anisotropy develops from the combined effects of filament orientation, interlayer bonding quality, pore morphology, cold-joint formation, mechanical interlocking, hydration continuity, and reinforcement limitations. Weak interlayer regions act not only as preferred paths for crack initiation and propagation under tensile, flexural, shear, and compressive loading, but also as transport channels that accelerate water absorption, chloride ingress, carbonation, sulfate attack, and freeze–thaw deterioration. The review further highlights that fiber, textile, FRP, and discrete reinforcement strategies can reduce some consequences of anisotropy, but their effectiveness depends on whether they bridge the weaker interlayer regions rather than merely reinforcing the filament direction. SEM-based observations confirm that microstructural discontinuities, fiber-matrix debonding, irregular hydration products, and connected pores provide the material-level basis for the directional response of printed concrete. Overall, anisotropy should be treated as a design-critical feature of 3DPC rather than as a secondary defect. Reliable structural application requires coordinated control of mixture rheology, deposition parameters, interlayer timing, curing, toolpath design, and reinforcement layout.

Schlagwörter

Stichwörter der Autor:innen

3D printed concreteanisotropycold jointdurabilityfiber reinforcementinterlayer bondingmechanical interlockingstructural performance

Autor:innen und Institutionen

  • Department of Civil Engineering, Bursa Uludag University, Bursa 16059, Türkiye.
  • Department of Architecture, Restoration and Design, Peoples' Friendship University of Russia (RUDN), 117198 Moscow, Russia.
  • Department of Construction Technologies and Structural Materials, Peoples' Friendship University of Russia (RUDN), 117198 Moscow, Russia.
  • Department of Industrial and Architectural Design, Peoples' Friendship University of Russia (RUDN), 117198 Moscow, Russia.
  • College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, China.

ORCID-Profile: Ali Mardani, Mohammad Hematibahar, Qais Abdulrahman Ali Qais, Ivan Khalil, Tesfaldet Hadgembes Gebre, Ahmed Elsheikh

Förderung

  • Bursa Uludağ University Scientific Research Projects Unit (BAP)

Zitieren

APA

Mardani, A., Hematibahar, M., Özteber, S., Qais, Q. A. A., Khalil, I., Gebre, T. H., & Elsheikh, A. (2026). Anisotropic Behavior of 3D-Printed Concrete: Interlayer Bonding, Pore Architecture, Reinforcement Limitations, and Durability Mechanisms. Materials, 19(17), 3698. https://doi.org/10.3390/ma19173698

Vancouver

Mardani A, Hematibahar M, Özteber S, Qais QAA, Khalil I, Gebre TH, et al. Anisotropic Behavior of 3D-Printed Concrete: Interlayer Bonding, Pore Architecture, Reinforcement Limitations, and Durability Mechanisms. Materials. 2026;19(17):3698. doi:10.3390/ma19173698

BibTeX
@article{Mardani2026,
  author = {Mardani, Ali and Hematibahar, Mohammad and Özteber, Selin and Qais, Qais Abdulrahman Ali and Khalil, Ivan and Gebre, Tesfaldet Hadgembes and Elsheikh, Ahmed},
  title = {Anisotropic Behavior of 3D-Printed Concrete: Interlayer Bonding, Pore Architecture, Reinforcement Limitations, and Durability Mechanisms},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {17},
  pages = {3698},
  doi = {10.3390/ma19173698}
}
Kostenlos starten →