Computational Insights into the Use of Polymer Cement Mortar for Negative Moment Strengthening in RC T-Beams
Coatings · 01.03.2026 · 16 (3) · 303
DOI: 10.3390/coatings16030303 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 01.03.2026. Verfasst von Gathot Heri Sudibyo und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 109 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute for Research and Community Service (LPPM) at Universitas Jenderal Soedirman (UNSOED), Indonesia, National Science and Technology Council (NSTC), Taiwan.
Abstract (Originalsprache)
This study provides computational insights into the flexural strengthening of reinforced concrete (RC) T-beams in the negative moment region using steel-reinforced polymer cement mortar (PCM) overlays. A validated three-dimensional nonlinear finite element (FE) model was developed using the Advanced Tool for Engineering Nonlinear Analysis (ATENA) software (version 2023.0.0.22492) to simulate the behavior of beams retrofitted with 40 mm thick PCM layers embedded with 13 mm and 16 mm deformed bars. Model validation was performed against previously published experimental results reported by the authors, demonstrating excellent agreement, with normalized mean square error (NMSE) values expressed as fractions between 0.0001 and 0.0022, and experimental-to-numerical ultimate load ratios ranging from 0.99 to 1.01. Parametric analyses were then conducted to investigate the influence of key variables, concrete compressive strength, PCM overlay thickness, and longitudinal reinforcement ratio on the global flexural performance. The results revealed that increasing the overlay thickness raised the ultimate load capacity by up to 15.4% and improved energy absorption by 43%. Enhancing concrete strength led to gains of up to 12.5% in load capacity and 15.8% in stiffness. Variations in reinforcement ratio had the most significant impact, increasing peak load by up to a factor of 2.02 and improving energy absorption by up to a factor of 1.49. Despite these improvements, reductions in ductility were observed across all strengthening configurations, underscoring a strength–deformability trade-off critical for seismic applications. These findings affirm the efficacy of steel-reinforced PCM overlays and provide design-oriented insights for optimizing negative moment retrofitting strategies in RC bridge girders and continuous beam systems.
Förderung
- Institute for Research and Community Service (LPPM) at Universitas Jenderal Soedirman (UNSOED), Indonesia
- National Science and Technology Council (NSTC), Taiwan
Zitieren
APA
Sudibyo, G. H., Wariyatno, N. G., Mulyono, B., Haryanto, Y., Hu, H., Hsiao, F., Nugroho, L., Hidayat, B. A., & Sari, S. T. (2026). Computational Insights into the Use of Polymer Cement Mortar for Negative Moment Strengthening in RC T-Beams. Coatings, 16(3), 303. https://doi.org/10.3390/coatings16030303
Vancouver
Sudibyo GH, Wariyatno NG, Mulyono B, Haryanto Y, Hu H, Hsiao F, et al. Computational Insights into the Use of Polymer Cement Mortar for Negative Moment Strengthening in RC T-Beams. Coatings. 2026;16(3):303. doi:10.3390/coatings16030303
BibTeX
@article{Sudibyo2026,
author = {Sudibyo, Gathot Heri and Wariyatno, Nanang Gunawan and Mulyono, Bagyo and Haryanto, Yanuar and Hu, Hsuan-Teh and Hsiao, Fu-Pei and Nugroho, Laurencius and Hidayat, Banu Ardi and Sari, Silvia Tiara},
title = {Computational Insights into the Use of Polymer Cement Mortar for Negative Moment Strengthening in RC T-Beams},
journal = {Coatings},
year = {2026},
volume = {16},
number = {3},
pages = {303},
doi = {10.3390/coatings16030303}
}
EUVIMED