Plasma Electrolytic Oxidation of Al–Si Alloys in Al2O3 and SiO2 Nanoparticle-Modified Electrolytes
Coatings · 01.03.2026 · 16 (3) · 300
DOI: 10.3390/coatings16030300 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 01.03.2026. Verfasst von Gulzhaz Uazyrkhanova und 6 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
The study aims to strengthen cylindrical liners by plasma electrolytic oxidation (PEO) and to determine the optimal processing parameters for forming wear-resistant coatings. The results of laboratory experiments were transferred to practical application for liner strengthening, followed by testing coatings formed directly on real components. PEO was applied to cylindrical sleeves made of eutectic aluminum–silicon alloy EN AC-48000 to form mechanically strong and wear-resistant oxide coatings. The coating had a two-layer structure: a dense inner barrier layer and a porous outer layer. The effect of SiO2 (~20 nm) and Al2O3 (~30 nm) nanoparticles in the electrolyte on the morphology, phase composition, microhardness and tribological characteristics of the coatings was evaluated. The optimal PEO parameters were determined as 325 V, duty cycle 25%, processing time 12 min, average current density 1.4 A·dm−2, and concentration of Al2O3 + SiO2 (5 + 5 g L−1). Under these conditions, the coating achieved a maximum microhardness of 259 HV, a low coefficient of friction of ~0.50 and a wear rate of 0.81 × 10−4 mm3·N−1·m−1. X-ray diffraction analysis confirmed the formation of γ-Al2O3 without changing the silicon phase. The results provide quantitative data on the effects of nanoparticles and PEO parameters on coating properties, which is important for the development of long-life part surfaces. The increased microhardness and wear resistance are attributed to the formation of the ceramic γ-Al2O3 phase and the densification of the porous structure due to the incorporation of Al2O3 and SiO2 nanoparticles, which reduce defect density and limit the adhesive–abrasive wear mechanism.
Förderung
- Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Uazyrkhanova, G., Kombayev, K., Kozhakhmetov, Y., Moldabayeva, G., Rutkowska-Gorczyca, M., Imbirovych, N., & Khoshnaw, F. (2026). Plasma Electrolytic Oxidation of Al–Si Alloys in Al2O3 and SiO2 Nanoparticle-Modified Electrolytes. Coatings, 16(3), 300. https://doi.org/10.3390/coatings16030300
Vancouver
Uazyrkhanova G, Kombayev K, Kozhakhmetov Y, Moldabayeva G, Rutkowska-Gorczyca M, Imbirovych N, et al. Plasma Electrolytic Oxidation of Al–Si Alloys in Al2O3 and SiO2 Nanoparticle-Modified Electrolytes. Coatings. 2026;16(3):300. doi:10.3390/coatings16030300
BibTeX
@article{Uazyrkhanova2026,
author = {Uazyrkhanova, Gulzhaz and Kombayev, Kuat and Kozhakhmetov, Yernat and Moldabayeva, Gulzhaz and Rutkowska-Gorczyca, Małgorzata and Imbirovych, Nataliia and Khoshnaw, Fuad},
title = {Plasma Electrolytic Oxidation of Al–Si Alloys in Al2O3 and SiO2 Nanoparticle-Modified Electrolytes},
journal = {Coatings},
year = {2026},
volume = {16},
number = {3},
pages = {300},
doi = {10.3390/coatings16030300}
}
EUVIMED