EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Characterization of Coatings Formed on As-Cast Al, Al–Si, and Al–Ca Aluminum Substrates by Plasma Electrolytic Oxidation

Nikolay V. Letyagin, Torgom K. Akopyan, Alexander A. Sokorev, Tatiana A. Sviridova, Stanislav O. Cherkasov, Yulbarskhon N. Mansurov

Metals · 23.08.2023 · 13 (9) · 1509

DOI: 10.3390/met13091509 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 23.08.2023. Verfasst von Nikolay V. Letyagin und 5 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Moscow Polytechnic University within the framework of the grant named after Pyotr Kapitsa (SEM, EMPA, XRD, HV) and by the Russian Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, ceramic coatings were grown on the surface of as-cast aluminum alloys via plasma electrolytic oxidation (PEO). The effect of the Si- and Ca-alloying elements in aluminum on the growth process, morphology, composition, mechanical, and corrosion properties of the PEO coatings was investigated. Uniform coatings with a minimum number of defects were formed on the surfaces of Al–Ca alloys. Increasing the Si content in Al led to an increase in the bulk and surface porosity of the coatings. The α-Al2O3 phase mainly formed in the coatings synthesized on pure Al and Al–Ca alloys, while an increased amount of Si in Al alloys hindered the formation of the α-Al2O3 phase. The coatings had a microhardness of 660–1180 HV, which was 20–30 times higher than that of the original as-cast alloy. Moreover, the coating on the Al–Ca alloys had the highest peak hardness, which was probably caused by the formation of a greater amount of the α-Al2O3 phase. Electrochemical studies in 3.5% NaCl have shown that PEO coatings reduce the corrosion current density. Of all PEO-treated alloys, Al and Al1Ca have the lowest corrosion current density and hence the highest corrosion resistance due to the composition and uniformity of the coating.

Förderung

  • Moscow Polytechnic University within the framework of the grant named after Pyotr Kapitsa (SEM, EMPA, XRD, HV) and by the Russian Science Foundation

Zitieren

APA

Letyagin, N. V., Akopyan, T. K., Sokorev, A. A., Sviridova, T. A., Cherkasov, S. O., & Mansurov, Y. N. (2023). The Characterization of Coatings Formed on As-Cast Al, Al–Si, and Al–Ca Aluminum Substrates by Plasma Electrolytic Oxidation. Metals, 13(9), 1509. https://doi.org/10.3390/met13091509

Vancouver

Letyagin NV, Akopyan TK, Sokorev AA, Sviridova TA, Cherkasov SO, Mansurov YN. The Characterization of Coatings Formed on As-Cast Al, Al–Si, and Al–Ca Aluminum Substrates by Plasma Electrolytic Oxidation. Metals. 2023;13(9):1509. doi:10.3390/met13091509

BibTeX
@article{Letyagin2023,
  author = {Letyagin, Nikolay V. and Akopyan, Torgom K. and Sokorev, Alexander A. and Sviridova, Tatiana A. and Cherkasov, Stanislav O. and Mansurov, Yulbarskhon N.},
  title = {The Characterization of Coatings Formed on As-Cast Al, Al–Si, and Al–Ca Aluminum Substrates by Plasma Electrolytic Oxidation},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1509},
  doi = {10.3390/met13091509}
}
Kostenlos starten →