Preparation and Performance Study of Modified Graphene Oxide/Polyurethane Anti-Corrosion Coating
Coatings · 19.01.2026 · 16 (1) · 131
DOI: 10.3390/coatings16010131 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 19.01.2026. Verfasst von Shudi Zhang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To address the corrosion and degradation of metallic materials in seawater, tidal, and similar environments, this study employs lysine (C6H14N2O2) to modify graphene oxide (GO) via a hydrothermal process. The modified graphene oxide (f-GO) and poly(l-lysine) (PL) composite was characterized structurally and functionally using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) to characterize its structure and properties. A composite coating was prepared using modified graphene oxide (f-GO) and polyurethane (PU), which underwent electrochemical testing, hardness testing, corrosion rate testing, adhesion testing, impact resistance testing, and salt spray corrosion resistance testing. Experimental results indicate that C-N stretching vibration peaks appeared at all reaction temperatures. At 85 °C, f-GO85 exhibited optimal modification with a layer spacing of 1.471 nm, 72% transmittance, and superior thermal stability, confirming successful lysine grafting onto the GO surface. Corrosion resistance testing of the composite coating revealed enhanced adhesion and impact resistance, reduced corrosion rate, decreased corrosion current density in polarization curves, positive shift in corrosion potential, and higher impedance values in impedance curves, indicating improved coating density and corrosion resistance. Salt spray tests demonstrated that incorporating lysine-modified graphene oxide significantly improved the anti-corrosion performance of polyurethane coatings. Optimal corrosion resistance was achieved when the modified graphene oxide content was 0.2 wt%.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, S., Wei, X., Xiao, N., Bing, J., Dong, J., Ma, J., & Zhang, T. (2026). Preparation and Performance Study of Modified Graphene Oxide/Polyurethane Anti-Corrosion Coating. Coatings, 16(1), 131. https://doi.org/10.3390/coatings16010131
Vancouver
Zhang S, Wei X, Xiao N, Bing J, Dong J, Ma J, et al. Preparation and Performance Study of Modified Graphene Oxide/Polyurethane Anti-Corrosion Coating. Coatings. 2026;16(1):131. doi:10.3390/coatings16010131
BibTeX
@article{Zhang2026,
author = {Zhang, Shudi and Wei, Xinya and Xiao, Na and Bing, Jiahui and Dong, Jialin and Ma, Jiacheng and Zhang, Tao},
title = {Preparation and Performance Study of Modified Graphene Oxide/Polyurethane Anti-Corrosion Coating},
journal = {Coatings},
year = {2026},
volume = {16},
number = {1},
pages = {131},
doi = {10.3390/coatings16010131}
}
EUVIMED