Preparation and Research of a Metal Anti-Corrosion Coating Based on PDMS Reinforcement
Coatings · 08.01.2026 · 16 (1) · 74
DOI: 10.3390/coatings16010074 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 08.01.2026. Verfasst von Chenyan Xie und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Frontier Electric Power Enterprise Fund.
Abstract (Originalsprache)
Metal materials are widely used in power grid infrastructure, but they are prone to metal corrosion due to long-term exposure to various environmental conditions, resulting in significant losses. The existing superhydrophobic coatings have good anti-corrosion performance, but poor wear resistance. Therefore, it is extremely important to improve the wear resistance of superhydrophobic coatings. In this study, a kind of fluorine-modified SiO2 particle was prepared with pentafluorooctyltrimethoxysilane (FAS-13) as the low surface energy modifier, following the fabrication of a superhydrophobic coating on metal substrate via a PDMS-doped spray deposition method to reinforcement wear resistance property. XPS, FT-IR and Raman spectra confirmed the successful introduction of FAS-13 on SiO2 particles, as evidenced by the characteristic fluorine-related peaks. TGA revealed that the fluorine modified SiO2 (F-SiO2) particles exhibited excellent thermal stability, with an initial decomposition temperature of 354 °C. From the perspective of surface morphology, the relevant data indicated a peak-to-valley height difference of only 88.7 nm, with Rq of 11.9 nm and Ra of 8.86 nm. And it also exhibited outstanding superhydrophobic property with contact angle (CA) of 164.44°/159.48°, demonstrating remarkable self-cleaning performance. And it still maintained CA of over 150° even after cyclic abrasion of 3000 cm with 800 grit sandpaper under a 100 g load, showing exceptional wear resistance. In addition, it was revealed that the coated electrode retained a high impedance value of 8.53 × 108 Ω·cm2 at 0.1 Hz after 480 h of immersion in 5 wt% NaCl solution, with the CPE exponent remaining close to unity (from 1.00 to 0.97), highlighting its superior anti-corrosion performance and broad application prospects for metal corrosion prevention.
Förderung
- Jiangsu Frontier Electric Power Enterprise Fund
Zitieren
APA
Xie, C., Dou, P., Fu, G., Wang, J., Wei, Z., Lu, X., Sheng, S., Yuan, L., & Shen, B. (2026). Preparation and Research of a Metal Anti-Corrosion Coating Based on PDMS Reinforcement. Coatings, 16(1), 74. https://doi.org/10.3390/coatings16010074
Vancouver
Xie C, Dou P, Fu G, Wang J, Wei Z, Lu X, et al. Preparation and Research of a Metal Anti-Corrosion Coating Based on PDMS Reinforcement. Coatings. 2026;16(1):74. doi:10.3390/coatings16010074
BibTeX
@article{Xie2026,
author = {Xie, Chenyan and Dou, Peng and Fu, Gaojie and Wang, Jiaqi and Wei, Zeyi and Lu, Xinglin and Sheng, Suji and Yuan, Lixin and Shen, Bin},
title = {Preparation and Research of a Metal Anti-Corrosion Coating Based on PDMS Reinforcement},
journal = {Coatings},
year = {2026},
volume = {16},
number = {1},
pages = {74},
doi = {10.3390/coatings16010074}
}
EUVIMED