EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Si Content on the Microstructure and Properties of Hydrogenated Amorphous Carbon Films Deposited by Magnetron Sputtering Technique

Zhen Yu, Jiale Shang, Qingye Wang, Haoxiang Zheng, Haijuan Mei, Dongcai Zhao, Xingguang Liu, Jicheng Ding, Jun Zheng

Coatings · 06.07.2025 · 15 (7) · 793

DOI: 10.3390/coatings15070793 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 06.07.2025. Verfasst von Zhen Yu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Postdoctoral Scientific Research Program Foundation, Open Project of China International Science and Technology Cooperation Base on Intelligent Equipment Manufacturing in Special Service Environment.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogenated amorphous carbon (a-C:H) films are widely valued for their excellent mechanical strength and low friction, but their performance significantly degrades at elevated temperatures, limiting practical applications in aerospace environments. In this work, we aimed to enhance the high-temperature tribological behavior of a-C:H films through controlled silicon (Si) doping. A series of a-C:H:Si films with varying Si contents were fabricated via direct current magnetron sputtering, and their microstructure, mechanical properties, and friction behavior were systematically evaluated from room temperature up to 400 °C. Results show that moderate Si doping (8.3 at.%) substantially enhances hardness and wear resistance, while enabling ultralow friction (as low as 0.0034) at 400 °C. This superior performance is attributed to the synergistic effects of transfer layer formation, preferential Si oxidation, and tribo-induced graphitization. This study provides new insights into the high-temperature lubrication mechanisms of Si-doped a-C:H films and demonstrates the critical role of Si content optimization, highlighting a viable strategy for extending the thermal stability and lifespan of solid-lubricating films.

Förderung

  • Anhui Postdoctoral Scientific Research Program Foundation
  • Open Project of China International Science and Technology Cooperation Base on Intelligent Equipment Manufacturing in Special Service Environment

Zitieren

APA

Yu, Z., Shang, J., Wang, Q., Zheng, H., Mei, H., Zhao, D., Liu, X., Ding, J., & Zheng, J. (2025). Influence of Si Content on the Microstructure and Properties of Hydrogenated Amorphous Carbon Films Deposited by Magnetron Sputtering Technique. Coatings, 15(7), 793. https://doi.org/10.3390/coatings15070793

Vancouver

Yu Z, Shang J, Wang Q, Zheng H, Mei H, Zhao D, et al. Influence of Si Content on the Microstructure and Properties of Hydrogenated Amorphous Carbon Films Deposited by Magnetron Sputtering Technique. Coatings. 2025;15(7):793. doi:10.3390/coatings15070793

BibTeX
@article{Yu2025,
  author = {Yu, Zhen and Shang, Jiale and Wang, Qingye and Zheng, Haoxiang and Mei, Haijuan and Zhao, Dongcai and Liu, Xingguang and Ding, Jicheng and Zheng, Jun},
  title = {Influence of Si Content on the Microstructure and Properties of Hydrogenated Amorphous Carbon Films Deposited by Magnetron Sputtering Technique},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {7},
  pages = {793},
  doi = {10.3390/coatings15070793}
}
Kostenlos starten →