EUVIMEDEUVIMED entdecken
Crossref

Influence of Gas Atmosphere and Deposition Time on Si/MnO₂ Thin Films Properties Deposited by Magnetron Sputtering for Supercapacitor Application

Tansya Trisnatika Dewi, Boon Tong Goh, Reza Akbar Pahlevi, Ishmah Luthfiyah, Markus Diantoro

Journal of Mechanical Engineering Science and Technology (JMEST) · 17.05.2026 · 10 (1) · 76-91

DOI: 10.17977/2580-2402.1201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering Science and Technology (JMEST), online erschienen am 17.05.2026. Verfasst von Tansya Trisnatika Dewi und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thin films of MnO2 were successfully deposited onto Si substrates using the magnetron sputtering technique in various gas atmospheres and deposition times to study their influence on the structural, morphological, electrical, and electrochemical properties for application as supercapacitor electrodes. Structural analysis using XRD showed that deposition under an Ar+O2 gas atmosphere increased the crystallite size and crystallinity of the Si/MnO2 films, while shorter deposition times reduced the crystallite size and lowered the crystallinity. Surface morphology observation using SEM showed that the film deposited in an Ar+O2 gas atmosphere had smaller, more uniform, evenly distributed, and closely packed grain sizes. Conversely, shorter deposition times result in larger apparent grain and pore sizes. Electrical properties measured using a four-point probe showed an increase in electrical conductivity for films deposited with an Ar+O2 gas atmosphere, while shorter deposition times decreased conductivity. Electrochemical performance measurements using CV showed that under atmospheric Ar+O2 conditions, the specific capacitance increased to 9.80 μF/cm2, but decreased under shorter deposition times. The enhanced electrochemical performance is attributed to the film structure, which has smaller apparent pores and a more uniform grain size distribution, along with low resistivity, facilitating better electron transport pathways. Overall, the results of this study indicate that controlling gas flow conditions and deposition time during the sputtering process are important factors in adjusting the properties of Si/MnO2. This study provides important insights for the optimization of Si/MnO2-based electrodes for future energy storage applications.

Zitieren

APA

Dewi, T. T., Goh, B. T., Pahlevi, R. A., Luthfiyah, I., & Diantoro, M. (2026). Influence of Gas Atmosphere and Deposition Time on Si/MnO₂ Thin Films Properties Deposited by Magnetron Sputtering for Supercapacitor Application. Journal of Mechanical Engineering Science and Technology (JMEST), 10(1), 76-91. https://doi.org/10.17977/2580-2402.1201

Vancouver

Dewi TT, Goh BT, Pahlevi RA, Luthfiyah I, Diantoro M. Influence of Gas Atmosphere and Deposition Time on Si/MnO₂ Thin Films Properties Deposited by Magnetron Sputtering for Supercapacitor Application. Journal of Mechanical Engineering Science and Technology (JMEST). 2026;10(1):76-91. doi:10.17977/2580-2402.1201

BibTeX
@article{Dewi2026,
  author = {Dewi, Tansya Trisnatika and Goh, Boon Tong and Pahlevi, Reza Akbar and Luthfiyah, Ishmah and Diantoro, Markus},
  title = {Influence of Gas Atmosphere and Deposition Time on Si/MnO₂ Thin Films Properties Deposited by Magnetron Sputtering for Supercapacitor Application},
  journal = {Journal of Mechanical Engineering Science and Technology (JMEST)},
  year = {2026},
  volume = {10},
  number = {1},
  pages = {76--91},
  doi = {10.17977/2580-2402.1201}
}
Kostenlos starten →