EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings

Bauyrzhan Rakhadilov, Lyaila Bayatanova, Aidar Kengesbekov, Nurtoleu Magazov, Zhanerke Toleukhanova, Didar Yeskermessov

Coatings · 04.07.2025 · 15 (7) · 790

DOI: 10.3390/coatings15070790 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 04.07.2025. Verfasst von Bauyrzhan Rakhadilov und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of power engineering requires the introduction of new materials and technologies to improve the quality and durability of products. One promising direction is the creation of heat-protective coatings for the protection of working surfaces of turbine blades of gas turbine engines operating at temperatures up to 1000–1200 °C. Intermetallic coatings based on iron aluminides (Fe3Al, FeAl) have high resistance to oxidation due to the formation of an oxide layer: Al2O3. However, their application is limited by brittleness due to the so-called third element effect, which can be reduced through alloying with chromium. In this study the processes of formation of Fe–Al–Cr intermetallic coatings produced by air plasma spraying and the mechanisms affecting their stability at high temperatures were investigated. Experimental studies included the analysis of the microhardness, wear resistance, and corrosion resistance of coatings, as well as their phase composition and microstructure. The results showed that the optimization of sputtering parameters, especially in the FrCrAl (30_33) mode, promotes the formation of a coating with improved tribological and anticorrosion characteristics, which is associated with its dense and uniform structure. These data have an important practical significance for the creation of wear-resistant and corrosion-resistant coatings applicable in power engineering.

Förderung

  • Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Rakhadilov, B., Bayatanova, L., Kengesbekov, A., Magazov, N., Toleukhanova, Z., & Yeskermessov, D. (2025). Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings. Coatings, 15(7), 790. https://doi.org/10.3390/coatings15070790

Vancouver

Rakhadilov B, Bayatanova L, Kengesbekov A, Magazov N, Toleukhanova Z, Yeskermessov D. Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings. Coatings. 2025;15(7):790. doi:10.3390/coatings15070790

BibTeX
@article{Rakhadilov2025,
  author = {Rakhadilov, Bauyrzhan and Bayatanova, Lyaila and Kengesbekov, Aidar and Magazov, Nurtoleu and Toleukhanova, Zhanerke and Yeskermessov, Didar},
  title = {Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {7},
  pages = {790},
  doi = {10.3390/coatings15070790}
}
Kostenlos starten →