Hybrid Surface Treatment Technologies Based on the Electrospark Alloying Method: A Review
Coatings · 16.06.2025 · 15 (6) · 721
DOI: 10.3390/coatings15060721 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 16.06.2025. Verfasst von Oksana Haponova und 3 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of Ukraine.
Abstract (Originalsprache)
Technologies for functional coatings are evolving rapidly, with electrospark alloying (ESA) emerging as a promising method for surface modification due to its efficiency and localized impact. This review analyzes the fundamental principles of ESA and the effects of process parameters on coating characteristics and highlights its advantages and limitations. Particular attention is given to hybrid ESA-based technologies, including combinations with laser treatment, plastic deformation, vapor deposition, and polymer-metal overlays. These hybrid methods significantly improve coating quality by enhancing hardness, adhesion, and structural integrity and reducing roughness and defects. However, the multi-parameter nature of these processes presents optimization challenges. This review identifies knowledge gaps related to process reproducibility, control of microstructure formation, and long-term performance under service conditions. Recent breakthroughs in combining ESA with high-energy surface treatments are discussed. Future research should focus on systematic parameter optimization, in situ diagnostics, and predictive modeling to enable the design of application-specific hybrid coatings.
Förderung
- Ministry of Education and Science of Ukraine
Zitieren
APA
Haponova, O., Tarelnyk, V., Mościcki, T., & Tarelnyk, N. (2025). Hybrid Surface Treatment Technologies Based on the Electrospark Alloying Method: A Review. Coatings, 15(6), 721. https://doi.org/10.3390/coatings15060721
Vancouver
Haponova O, Tarelnyk V, Mościcki T, Tarelnyk N. Hybrid Surface Treatment Technologies Based on the Electrospark Alloying Method: A Review. Coatings. 2025;15(6):721. doi:10.3390/coatings15060721
BibTeX
@article{Haponova2025,
author = {Haponova, Oksana and Tarelnyk, Viacheslav and Mościcki, Tomasz and Tarelnyk, Nataliia},
title = {Hybrid Surface Treatment Technologies Based on the Electrospark Alloying Method: A Review},
journal = {Coatings},
year = {2025},
volume = {15},
number = {6},
pages = {721},
doi = {10.3390/coatings15060721}
}
EUVIMED