Investigation of Multilayer Tribological Coatings on CuSn10Pb10 Bronze Produced by Electrospark Alloying
Bulletin of the Polish Academy of Sciences Technical Sciences · 12.06.2026 · 1143
DOI: 10.24425/bpasts.2026.1143 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of the Polish Academy of Sciences Technical Sciences, online erschienen am 12.06.2026. Verfasst von Oksana Haponova und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Bronzes are widely used as antifriction materials in sliding units. However, their performance depends heavily on the condition and structure of the surface layer. This study investigates the formation of multilayer antifriction coatings on CuSn10Pb10 bronze by electrospark alloying (ESA) using silver, lead, and tin electrodes. ESA was carried out in a sulphurcontaining technological medium. Two technological schemes were implemented: conventional multilayer alloying (Ag → Pb → Ag and Ag → Sn → Ag) and alloying using a sulphur-containing medium ((S + Ag) → Pb → (S + Ag) and (S + Ag) → Sn → (S + Ag)). The microstructure, microhardness, surface roughness, and elemental distribution in the formed layers were investigated using optical microscopy, scanning electron microscopy with energy-dispersive analysis, and microhardness measurements. The tribological properties of the coatings were evaluated using a ball-on-disk configuration. It was determined that ESA produces a multilayer structure consisting of an outer layer, a bright sublayer, a heat-affected zone, and the substrate. The bright sublayer exhibited the highest microhardness values due to intensive material mixing and rapid melt solidification. The lowest friction coefficients (μ = 0.095–0.148) were obtained for sulphur-containing coatings. Introducing sulphur reduces the friction force by an average of 19%, due to a decrease in the adhesive component of friction and suppression of contact seizure.
Zitieren
APA
Haponova, O., Tarelnyk, V., Tarelnyk, N., Laponog, G., Smolenko, S., & Mościcki, T. (2026). Investigation of Multilayer Tribological Coatings on CuSn10Pb10 Bronze Produced by Electrospark Alloying. Bulletin of the Polish Academy of Sciences Technical Sciences, 1143. https://doi.org/10.24425/bpasts.2026.1143
Vancouver
Haponova O, Tarelnyk V, Tarelnyk N, Laponog G, Smolenko S, Mościcki T. Investigation of Multilayer Tribological Coatings on CuSn10Pb10 Bronze Produced by Electrospark Alloying. Bulletin of the Polish Academy of Sciences Technical Sciences. 2026:1143. doi:10.24425/bpasts.2026.1143
BibTeX
@article{Haponova2026,
author = {Haponova, Oksana and Tarelnyk, Viacheslav and Tarelnyk, Nataliia and Laponog, Gennadii and Smolenko, Stanislav and Mościcki, Tomasz},
title = {Investigation of Multilayer Tribological Coatings on CuSn10Pb10 Bronze Produced by Electrospark Alloying},
journal = {Bulletin of the Polish Academy of Sciences Technical Sciences},
year = {2026},
pages = {1143},
doi = {10.24425/bpasts.2026.1143}
}
EUVIMED