Investigation into the Preparation and Electrochemical Energy Storage Performance of Nickel Cobalt Oxide-Based Composite Anode Materials
Coatings · 22.03.2025 · 15 (4) · 373
DOI: 10.3390/coatings15040373 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 22.03.2025. Verfasst von Yuyang Wang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Provincial Foreign Expert Program for 2024, Opening Project of Shanxi Province Key Laboratory of Chemical Process Intensification, North University of China, State Key Laboratory of Microbial Technology Open Projects Fund.
Abstract (Originalsprache)
Microbial fuel cells (MFCs) are a novel bioenergy technology that utilizes microorganisms to catalyze the conversion of fuels into electricity. However, traditional MFCs are constrained by the low electricity generation capacity of microorganisms, resulting in relatively low power output. Additionally, the inability of traditional MFCs to store electricity significantly limits their practical applications. In this study, we fabricate a novel oxide graphite/nickel cobalt oxide (GO/NiCo2O4) capacitive composite bioanode material supported on stainless-steel fiber felt (SSFF). This composite material combines the excellent biocompatibility of graphite oxide and the energy storage capacity of nickel cobalt oxide. Consequently, the prepared anode exhibits significant advantages, including high specific capacitance, efficient electron transport, and enhanced biocompatibility. The MFC with the SSFF/GO/NiCo2O4 anode demonstrated a significantly enhanced power density, achieving a maximum of 1267.5 mW/m2—1.38-fold and 2.23-fold higher than those of the SSFF/GO and SSFF anodes, respectively. Moreover, the modified anode (SSFF/GO/NiCo2O4) exhibited a stored charge (Qs) of 1405.35 C/m2, representing 2.61-fold and 35.79-fold increases compared to the SSFF/GO and SSFF anodes, respectively. High-throughput analysis revealed that SSFF/GO/NiCo2O4-modified anode achieved an electrogenic bacterial efficiency exceeding 81%, which was significantly higher than that of the SSFF/GO and SSFF anodes. The results of this study not only provide valuable insights and theoretical guidance for the development of MFCs using capacitive composite anode materials, they also present sustainable power solutions for low-power electronic systems, such as miniaturized sensors and IoT devices.
Förderung
- Provincial Foreign Expert Program for 2024
- Opening Project of Shanxi Province Key Laboratory of Chemical Process Intensification, North University of China
- State Key Laboratory of Microbial Technology Open Projects Fund
Zitieren
APA
Wang, Y., Kong, X., Wang, Z., Zhang, D., Song, Y., Ma, S., Duan, Y., Vyshnikin, A., Palchykov, V., & Zuo, J. (2025). Investigation into the Preparation and Electrochemical Energy Storage Performance of Nickel Cobalt Oxide-Based Composite Anode Materials. Coatings, 15(4), 373. https://doi.org/10.3390/coatings15040373
Vancouver
Wang Y, Kong X, Wang Z, Zhang D, Song Y, Ma S, et al. Investigation into the Preparation and Electrochemical Energy Storage Performance of Nickel Cobalt Oxide-Based Composite Anode Materials. Coatings. 2025;15(4):373. doi:10.3390/coatings15040373
BibTeX
@article{Wang2025,
author = {Wang, Yuyang and Kong, Xiangquan and Wang, Zhijie and Zhang, Dongming and Song, Yu and Ma, Su and Duan, Ying and Vyshnikin, Andrii and Palchykov, Vitalii and Zuo, Jinlong},
title = {Investigation into the Preparation and Electrochemical Energy Storage Performance of Nickel Cobalt Oxide-Based Composite Anode Materials},
journal = {Coatings},
year = {2025},
volume = {15},
number = {4},
pages = {373},
doi = {10.3390/coatings15040373}
}
EUVIMED