Determination of Nickel, Cobalt and Manganese in Lithium Nickel–Cobalt–Manganese Oxide Battery Materials by X-Ray Fluorescence Spectrometry with Fusion Preparation
Industry Science and Engineering · 2026-07 · 3 (7) · 29-36
DOI: 10.62381/i265704 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industry Science and Engineering, 2026-07. Verfasst von Lei Yu und 6 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben.
Abstract (Originalsprache)
This study established a rapid method for the simultaneous determination of nickel, cobalt, and manganese in lithium nickel–cobalt–manganese oxide (NMC). Sample preparation employed fusion pretreatment using a mixed flux of lithium tetraborate and lithium metaborate (67:33 mass ratio), followed by pre-oxidation at 700 °C for 10 min, fusion at 1150 °C, and artificial synthesis of calibration standards with well-defined concentration gradients from high-purity reference reagents. Quantitative analysis was performed using a wavelength-dispersive X-ray fluorescence (WDXRF) spectrometer. Key analytical parameters—including flux composition, flux-to-sample dilution ratio, excitation voltage and current, and matrix correction-were systematically optimized. Under the optimized conditions, certified reference materials were analyzed. The measured values fell within the certified uncertainty intervals, and the relative standard deviation (RSD) for replicate analyses was less than 2%. The results demonstrate that this method is rapid, accurate, and fully suitable for quality control analysis of lithium nickel–cobalt–manganese oxide battery materials.
Zitieren
APA
Yu, L., Zuo, Y., Zhang, X., Yang, Y., Li, T., Wang, L., & Liu, R. (2026). Determination of Nickel, Cobalt and Manganese in Lithium Nickel–Cobalt–Manganese Oxide Battery Materials by X-Ray Fluorescence Spectrometry with Fusion Preparation. Industry Science and Engineering, 3(7), 29-36. https://doi.org/10.62381/i265704
Vancouver
Yu L, Zuo Y, Zhang X, Yang Y, Li T, Wang L, et al. Determination of Nickel, Cobalt and Manganese in Lithium Nickel–Cobalt–Manganese Oxide Battery Materials by X-Ray Fluorescence Spectrometry with Fusion Preparation. Industry Science and Engineering. 2026;3(7):29-36. doi:10.62381/i265704
BibTeX
@article{Yu2026,
author = {Yu, Lei and Zuo, Yuting and Zhang, Xiao and Yang, Yin and Li, Tian and Wang, Li and Liu, Ruixin},
title = {Determination of Nickel, Cobalt and Manganese in Lithium Nickel–Cobalt–Manganese Oxide Battery Materials by X-Ray Fluorescence Spectrometry with Fusion Preparation},
journal = {Industry Science and Engineering},
year = {2026},
volume = {3},
number = {7},
pages = {29--36},
doi = {10.62381/i265704}
}
EUVIMED