Effect of Laser Energy Density on the Microstructure and Mechanical Properties of Al2O3/Inconel 718 Nanocomposites Fabricated by SLM
Coatings · 14.01.2025 · 15 (1) · 81
DOI: 10.3390/coatings15010081 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 14.01.2025. Verfasst von Haozhe Zhang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Metal-matrix nanocomposites (MMNCs) with high performance have broad application prospects. Selective laser melting (SLM) was employed to fabricate Al2O3-reinforced Inconel 718 nanocomposites. The influence of laser energy density (E) on the microstructure and properties of the materials was thereafter investigated. The results show that the microstructure and mechanical properties of the composite can be significantly improved by optimizing E. When E increased from 219 J/mm3 to 288 J/mm3, the size of the Al2O3 reinforcement reduced, and the average grain diameter of the matrix was found to decrease from 1.09 μm to 0.22 μm. Additionally, the relative density improved from 89.82% to 97.04%. When the laser energy density is 288 J/mm3, the sample exhibits favorable hardness and wear resistance. The average microhardness of samples with 288 J/mm3 reaches 379.32 HV0.5 Compared with 219 J/mm3 sample, the increase is 15.01%. The average friction coefficient and wear rate decreased to 0.24 and 3.75 × 10−4 mm3/N·m, respectively. Notably, compared with the samples with E of 219 J/mm3, these values reduced significantly by 60.65% and 60.15%, respectively. The study results can provide technical support for the production of MMNCs with high performance by SLM in industry.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, H., Zhang, G., Yu, W., Jiang, L., Xiang, J., Xia, Y., & Liu, K. (2025). Effect of Laser Energy Density on the Microstructure and Mechanical Properties of Al2O3/Inconel 718 Nanocomposites Fabricated by SLM. Coatings, 15(1), 81. https://doi.org/10.3390/coatings15010081
Vancouver
Zhang H, Zhang G, Yu W, Jiang L, Xiang J, Xia Y, et al. Effect of Laser Energy Density on the Microstructure and Mechanical Properties of Al2O3/Inconel 718 Nanocomposites Fabricated by SLM. Coatings. 2025;15(1):81. doi:10.3390/coatings15010081
BibTeX
@article{Zhang2025,
author = {Zhang, Haozhe and Zhang, Guixiang and Yu, Wenhui and Jiang, Linzhi and Xiang, Jinli and Xia, Yandan and Liu, Kun},
title = {Effect of Laser Energy Density on the Microstructure and Mechanical Properties of Al2O3/Inconel 718 Nanocomposites Fabricated by SLM},
journal = {Coatings},
year = {2025},
volume = {15},
number = {1},
pages = {81},
doi = {10.3390/coatings15010081}
}
EUVIMED