Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy
Coatings · 29.10.2024 · 14 (11) · 1376
DOI: 10.3390/coatings14111376 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 29.10.2024. Verfasst von Yucheng Xing und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jiangsu Province.
Abstract (Originalsprache)
In this paper, 4 mm thick 7075 aluminum alloy was utilized for conducting laser-MIG hybrid welding tests to investigate the correlation between the dynamic behavior of keyholes and process-induced porosity. Additionally, the generation and inhibition mechanisms of process porosity were elucidated. Utilizing a high-speed camera test system of our own design, the formation position and movement characteristics of keyholes in the molten pool under different welding parameters were captured using a “sandwich” method. The dynamic behavior of keyholes during the hybrid welding process was analyzed, and the porosity of each welded joint was quantified, revealing an intrinsic relationship between keyhole dynamics and aluminum alloy laser-MIG hybrid welding porosity. The findings indicate that variations in the defocusing amount can influence both the morphology and stability of keyholes in the molten pool, consequently impacting welding porosity. The dynamic behavior of keyholes under different defocusing amounts can be categorized into five types: no keyhole formation, collapse of the keyhole root, complete instability of the keyhole, instability of the keyhole root, and stability of the keyhole. At a defocus of +12 mm, stable keyholes were observed, and no defects in the welded joints were identified.
Förderung
- Natural Science Foundation of Jiangsu Province
Zitieren
APA
Xing, Y., Wang, F., Zhao, Y., Fu, J., Sun, Z., & Zhang, D. (2024). Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy. Coatings, 14(11), 1376. https://doi.org/10.3390/coatings14111376
Vancouver
Xing Y, Wang F, Zhao Y, Fu J, Sun Z, Zhang D. Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy. Coatings. 2024;14(11):1376. doi:10.3390/coatings14111376
BibTeX
@article{Xing2024,
author = {Xing, Yucheng and Wang, Feiyun and Zhao, Yong and Fu, Juan and Sun, Zhenbang and Zhang, Daxing},
title = {Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy},
journal = {Coatings},
year = {2024},
volume = {14},
number = {11},
pages = {1376},
doi = {10.3390/coatings14111376}
}
EUVIMED