EUVIMEDEUVIMED entdecken
Crossref

Strength enhancement of high-strength aluminum alloy oscillation laser–arc hybrid welded joints via TiC nanoparticles

Liwei Guo, Jihan Zhang, Bingxiao Xu, Jianhui Su, Fuyun Liu, Hongbo Xia, Xinkang Li, Fujia Xu, Xiaohui Han, Caiwang Tan

Journal of Laser Applications · 01.05.2026 · 38 (2)

DOI: 10.2351/7.0002072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 11.03.2026. Verfasst von Liwei Guo und 9 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-strength aluminum alloys are attractive for lightweight structures, but their weldability in fusion processes is limited by coarse grains and brittle grain-boundary intermetallics. In this work, TiC nanoparticles were incorporated into the fusion zone during oscillating laser–arc hybrid welding to tailor the microstructure and mechanical response of a high-strength aluminum alloy. TiC addition refined weld grains and promoted a columnar-to-equiaxed transition; at 1.0 wt. % TiC, the average weld grain size decreased from 60.23 to 37.27 μm and a nearly fully equiaxed morphology formed. TiC nanoparticles within grains and along grain boundaries transformed grain-boundary θ-Al2Cu/η-MgZn2 from continuous strips into reticular and particulate products, whereas 1.5 wt. % TiC caused nanoparticle agglomeration and higher porosity. As a result, joint properties showed a nonmonotonic dependence on TiC content: at 1.0 wt. % TiC, the weld microhardness increased by about 17 HV, the ultimate tensile strength rose from 288 to 341 MPa, and the elongation improved from 3.16% to 5.73%. Orowan strengthening from dispersed TiC nanoparticles, assisted by Hall–Petch grain refinement and defect reduction, mainly accounted for the strength increment. These findings demonstrate an efficient route to strengthen high-strength aluminum alloy welds via TiC nanoparticle-assisted oscillating laser–arc hybrid welding.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Guo, L., Zhang, J., Xu, B., Su, J., Liu, F., Xia, H., Li, X., Xu, F., Han, X., & Tan, C. (2026). Strength enhancement of high-strength aluminum alloy oscillation laser–arc hybrid welded joints via TiC nanoparticles. Journal of Laser Applications, 38(2). https://doi.org/10.2351/7.0002072

Vancouver

Guo L, Zhang J, Xu B, Su J, Liu F, Xia H, et al. Strength enhancement of high-strength aluminum alloy oscillation laser–arc hybrid welded joints via TiC nanoparticles. Journal of Laser Applications. 2026;38(2). doi:10.2351/7.0002072

BibTeX
@article{Guo2026,
  author = {Guo, Liwei and Zhang, Jihan and Xu, Bingxiao and Su, Jianhui and Liu, Fuyun and Xia, Hongbo and Li, Xinkang and Xu, Fujia and Han, Xiaohui and Tan, Caiwang},
  title = {Strength enhancement of high-strength aluminum alloy oscillation laser–arc hybrid welded joints via TiC nanoparticles},
  journal = {Journal of Laser Applications},
  year = {2026},
  volume = {38},
  number = {2},
  doi = {10.2351/7.0002072}
}
Kostenlos starten →