EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Catalytic Activity Evaluation of Molten Salt-Treated Stainless Steel Electrodes for Hydrogen Evolution Reaction in Alkaline Medium

Michihisa Fukumoto, Hiroki Takahashi, Dawid Kutyła, Marek Wojnicki, Piotr Żabiński

Coatings · 26.06.2024 · 14 (7) · 796

DOI: 10.3390/coatings14070796 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 26.06.2024. Verfasst von Michihisa Fukumoto und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The goal of this research is to fabricate a novel type of highly active porous electrode material, based on stainless steel and dedicated to water electrolyzers. The main novelty of the presented work is the innovative application of the molten salts treatment, which allows the design of a highly developed porous structure, which characterizes significantly higher catalytic activity than untreated steel substrates. The equimolar mixture of NaCl and KCl with 3.5 mol% AlF3 was used as the molten salt. The surface modification procedure includes the deposition of an Al layer with application at the potential of −1.8 V and following dissolution at −0.9 V, to create a porous alloy surface. The cathodic polarization measurements of the prepared porous stainless steel electrodes were measured in a 10 mass% KOH solution. Moreover, the amount of hydrogen generated during constant voltage electrolysis with a hydrogen sensor in situ was also measured. The porous stainless steel alloy showed higher current density at lower potentials in the cathodic polarization compared to untreated stainless steel. The cathodic polarization measurements in alkaline solution showed that the porous 304 stainless steel alloy is an excellent cathode material.

Zitieren

APA

Fukumoto, M., Takahashi, H., Kutyła, D., Wojnicki, M., & Żabiński, P. (2024). Catalytic Activity Evaluation of Molten Salt-Treated Stainless Steel Electrodes for Hydrogen Evolution Reaction in Alkaline Medium. Coatings, 14(7), 796. https://doi.org/10.3390/coatings14070796

Vancouver

Fukumoto M, Takahashi H, Kutyła D, Wojnicki M, Żabiński P. Catalytic Activity Evaluation of Molten Salt-Treated Stainless Steel Electrodes for Hydrogen Evolution Reaction in Alkaline Medium. Coatings. 2024;14(7):796. doi:10.3390/coatings14070796

BibTeX
@article{Fukumoto2024,
  author = {Fukumoto, Michihisa and Takahashi, Hiroki and Kutyła, Dawid and Wojnicki, Marek and Żabiński, Piotr},
  title = {Catalytic Activity Evaluation of Molten Salt-Treated Stainless Steel Electrodes for Hydrogen Evolution Reaction in Alkaline Medium},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {796},
  doi = {10.3390/coatings14070796}
}
Kostenlos starten →