EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scratch Response of Hollow Cathode Radiofrequency Plasma-Nitrided and Sintered 316L Austenitic Stainless Steel

Marcelo Broch, Cristian Padilha Fontoura, Arnaldo Oliveira Lima, Michell Felipe Cano Ordoñez, Izabel Fernanda Machado, Cesar Aguzzoli, María Cristina Moré Farias

Coatings · 12.03.2024 · 14 (3) · 334

DOI: 10.3390/coatings14030334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 12.03.2024. Verfasst von Marcelo Broch und 6 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Higher Education Personnel (CAPES), National Council for Scientific and Technological Development (CNPq).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low-temperature plasma nitriding is a thermochemical surface treatment that promotes surface hardening and wear resistance enhancement without compromising the corrosion resistance of sintered austenitic stainless steels. Hollow cathode radiofrequency (RF) plasma nitriding was conducted to evaluate the influence of the working pressure and nitriding time on the microstructure and thickness of the nitrided layers. A group of samples of sintered 316L austenitic stainless steel were plasma-nitrided at 400 °C for 4 h, varying the working pressure from 160 to 25 Pa, and the other group was treated at the same temperature, varying the nitriding time (2 h and 4 h) while keeping the pressure at 25 Pa. A higher pressure resulted in a thinner, non-homogeneous nitrided layer with an edge effect. Regardless of the nitriding duration, the lowest pressure (25 Pa) promoted the formation of a homogenously nitrided layer composed of nitrogen-expanded austenite that was free of iron or chromium nitride and harder and more scratching-wear-resistant than the soft steel substrate.

Förderung

  • Higher Education Personnel (CAPES)
  • National Council for Scientific and Technological Development (CNPq)

Zitieren

APA

Broch, M., Fontoura, C. P., Lima, A. O., Ordoñez, M. F. C., Machado, I. F., Aguzzoli, C., & Farias, M. C. M. (2024). Scratch Response of Hollow Cathode Radiofrequency Plasma-Nitrided and Sintered 316L Austenitic Stainless Steel. Coatings, 14(3), 334. https://doi.org/10.3390/coatings14030334

Vancouver

Broch M, Fontoura CP, Lima AO, Ordoñez MFC, Machado IF, Aguzzoli C, et al. Scratch Response of Hollow Cathode Radiofrequency Plasma-Nitrided and Sintered 316L Austenitic Stainless Steel. Coatings. 2024;14(3):334. doi:10.3390/coatings14030334

BibTeX
@article{Broch2024,
  author = {Broch, Marcelo and Fontoura, Cristian Padilha and Lima, Arnaldo Oliveira and Ordoñez, Michell Felipe Cano and Machado, Izabel Fernanda and Aguzzoli, Cesar and Farias, María Cristina Moré},
  title = {Scratch Response of Hollow Cathode Radiofrequency Plasma-Nitrided and Sintered 316L Austenitic Stainless Steel},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {3},
  pages = {334},
  doi = {10.3390/coatings14030334}
}
Kostenlos starten →