Optimization of the Electrophoretic Deposition Parameters and Mechanism of Formation of Ag-TiO2 Nanocoatings on a NiTi Shape Memory Alloy: Part I
Coatings · 28.12.2023 · 14 (1) · 44
DOI: 10.3390/coatings14010044 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 28.12.2023. Verfasst von Karolina Dudek und 4 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center in Poland (NCN).
Abstract (Originalsprache)
This paper reports research findings on the functionalization of NiTi shape memory alloy through the electrophoretic deposition of innovative complex layers comprising a silver-rutile (Ag-TiO2) nanocomposite. A colloidal suspension of a chemically synthesized Ag-TiO2 nanosystem prepared with a 59.4 ± 0.9 mV Zeta potential for anaphoretic deposition. Employing a design of experiment method (DoE), the optimal parameters for uniform coating depositions were identified as 40 V/3 min. Dilatometric tests and high-temperature microscopy determined that the deposited layers’ heat treatment temperature should not exceed 800 °C. Raman spectrometry and scanning electron microscopy (SEM) provided comprehensive structural and morphological insights into the resulting continuous and crack-free layer. The article extensively explores the impact of annealing on structural changes within the layer, proposing mechanisms for its formation. The findings affirm the feasibility of creating a highly reactive layer on the NiTi alloy, holding potential significance in implantation medicine.
Förderung
- National Science Center in Poland (NCN)
Zitieren
APA
Dudek, K., Dulski, M., Podwórny, J., Kujawa, M., & Rawicka, P. (2023). Optimization of the Electrophoretic Deposition Parameters and Mechanism of Formation of Ag-TiO2 Nanocoatings on a NiTi Shape Memory Alloy: Part I. Coatings, 14(1), 44. https://doi.org/10.3390/coatings14010044
Vancouver
Dudek K, Dulski M, Podwórny J, Kujawa M, Rawicka P. Optimization of the Electrophoretic Deposition Parameters and Mechanism of Formation of Ag-TiO2 Nanocoatings on a NiTi Shape Memory Alloy: Part I. Coatings. 2023;14(1):44. doi:10.3390/coatings14010044
BibTeX
@article{Dudek2023,
author = {Dudek, Karolina and Dulski, Mateusz and Podwórny, Jacek and Kujawa, Magdalena and Rawicka, Patrycja},
title = {Optimization of the Electrophoretic Deposition Parameters and Mechanism of Formation of Ag-TiO2 Nanocoatings on a NiTi Shape Memory Alloy: Part I},
journal = {Coatings},
year = {2023},
volume = {14},
number = {1},
pages = {44},
doi = {10.3390/coatings14010044}
}
EUVIMED