EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of TiO2 on the Microstructure, Mechanical Properties and Corrosion Resistance of Hydroxyapatite HaP + TiO2 Nanocomposites Deposited Using Spray Pyrolysis

Hafedh Dhiflaoui, Sarra Ben Salem, Mohamed Salah, Youssef Dabaki, Slah Chayoukhi, Bilel Gassoumi, Anouar Hajjaji, Ahmed Ben Cheikh Larbi, Mosbah Amlouk, Hicham Benhayoune

Coatings · 21.07.2023 · 13 (7) · 1283

DOI: 10.3390/coatings13071283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 21.07.2023. Verfasst von Hafedh Dhiflaoui und 9 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium oxides and their alloys are widely used in medical applications because of their biocompatibility. However, they are characterized by their low resistance to corrosion. The HaP + TiO2 nanocomposites’ coating was applied in different experiments, especially on a Ti-6Al-4V substrate with the spray pyrolysis process to deal with such weakness. The TiO2 content effects on the surface morphology and the phase composition were investigated using a scanning electron microscopy, X-ray microanalysis (SEM-EDXS) and X-ray diffraction (XRD). The mechanical properties were determined with nanoindentation. The potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and simulated body fluid (SBF) solution environment tests were carried out to investigate the corrosion resistance of HaP + TiO2/Ti6Al4V systems. The experimental findings revealed that sprayed thin films possessed uniform morphology. The coatings’ nanoindentations proved that the HaP + 20% TiO2 coating hardness (252.77 MPa) and the elastic modulus (52.48 GPa) overtopped those of the pure hydroxyapatite coatings. The corrosion test demonstrated that the corrosion current density of about 36.1 µA cm−2 and the corrosion potential of the order of −392.7 mV of HaP + 20% TiO2 was lower compared to the pure HaP coating.

Zitieren

APA

Dhiflaoui, H., Salem, S. B., Salah, M., Dabaki, Y., Chayoukhi, S., Gassoumi, B., Hajjaji, A., Larbi, A. B. C., Amlouk, M., & Benhayoune, H. (2023). Influence of TiO2 on the Microstructure, Mechanical Properties and Corrosion Resistance of Hydroxyapatite HaP + TiO2 Nanocomposites Deposited Using Spray Pyrolysis. Coatings, 13(7), 1283. https://doi.org/10.3390/coatings13071283

Vancouver

Dhiflaoui H, Salem SB, Salah M, Dabaki Y, Chayoukhi S, Gassoumi B, et al. Influence of TiO2 on the Microstructure, Mechanical Properties and Corrosion Resistance of Hydroxyapatite HaP + TiO2 Nanocomposites Deposited Using Spray Pyrolysis. Coatings. 2023;13(7):1283. doi:10.3390/coatings13071283

BibTeX
@article{Dhiflaoui2023,
  author = {Dhiflaoui, Hafedh and Salem, Sarra Ben and Salah, Mohamed and Dabaki, Youssef and Chayoukhi, Slah and Gassoumi, Bilel and Hajjaji, Anouar and Larbi, Ahmed Ben Cheikh and Amlouk, Mosbah and Benhayoune, Hicham},
  title = {Influence of TiO2 on the Microstructure, Mechanical Properties and Corrosion Resistance of Hydroxyapatite HaP + TiO2 Nanocomposites Deposited Using Spray Pyrolysis},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {1283},
  doi = {10.3390/coatings13071283}
}
Kostenlos starten →