EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Wet and Dry Treatments on Surface Functional Groups and Mechanical Properties of Flax Fiber Composites

Ghane Moradkhani, Jacopo Profili, Mathieu Robert, Gaétan Laroche, Saïd Elkoun

Coatings · 02.06.2023 · 13 (6) · 1036

DOI: 10.3390/coatings13061036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 02.06.2023. Verfasst von Ghane Moradkhani und 4 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Center for High-Performance Polymer and Composite Systems (CREPEC), Quebec Centre for Advanced Materials (CQMF), Canada Research Chair in Polymer Eco-Composites.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flax fibers have found widespread use in eco-composite materials because of their remarkable mechanical properties compared to glass fibers. However, their low stability limits their use on a larger scale when employed in hot or humid environments. Therefore, the surfaces should be modified before the composite process to provide the best interfacial interactions and increase the dispersion of natural fibers. To tackle this problem, two kinds of modifications can be considered: wet and dry modifications. This research explores different methods to improve the adhesion between flax fibers and the poly lactic acid (PLA) polymer. Morphological and chemical modifications in the presence of acetone, alkali (as a wet modification), and with air atmospheric pressure plasma (as a dry modification) are compared in this research. The results revealed that altering the chemical characteristics on the surface significantly changed the mechanical properties of the final composite. More specifically, the Fourier transform infrared spectroscopy (FTIR) data indicate that wax-related peaks (2850 and 2920 cm−1) were eliminated by both wet and dry treatments. Dynamic mechanical analysis (DMA) results also highlighted that a better bond between the flax fibers and the PLA matrix is obtained with the plasma modification.

Förderung

  • Center for High-Performance Polymer and Composite Systems (CREPEC)
  • Quebec Centre for Advanced Materials (CQMF)
  • Canada Research Chair in Polymer Eco-Composites

Zitieren

APA

Moradkhani, G., Profili, J., Robert, M., Laroche, G., & Elkoun, S. (2023). Effects of Wet and Dry Treatments on Surface Functional Groups and Mechanical Properties of Flax Fiber Composites. Coatings, 13(6), 1036. https://doi.org/10.3390/coatings13061036

Vancouver

Moradkhani G, Profili J, Robert M, Laroche G, Elkoun S. Effects of Wet and Dry Treatments on Surface Functional Groups and Mechanical Properties of Flax Fiber Composites. Coatings. 2023;13(6):1036. doi:10.3390/coatings13061036

BibTeX
@article{Moradkhani2023,
  author = {Moradkhani, Ghane and Profili, Jacopo and Robert, Mathieu and Laroche, Gaétan and Elkoun, Saïd},
  title = {Effects of Wet and Dry Treatments on Surface Functional Groups and Mechanical Properties of Flax Fiber Composites},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {1036},
  doi = {10.3390/coatings13061036}
}
Kostenlos starten →