Elaboration and Solar Thermal Cycling of SiC/Al2O3/Fe–Cr–Al–Mo Multilayers
Corrosion and Materials Degradation · 2026-04-30 · 7 (2) · 28
DOI: 10.3390/cmd7020028 ↗At a glance
Journal article in Corrosion and Materials Degradation, published online on 2026-04-30. Written by Thiane Ndiaye and 6 co-authors. 26 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Research Agency.
Abstract (original language)
Concentrated Solar Power (CSP) tower systems require receiver materials capable of operating above 1000 °C to meet the efficiency targets of third-generation technologies (25–30%). Hybrid solutions, combining ceramic coatings with metallic substrates, offer promising thermomechanical stability under severe thermal cycling. This study investigates the high-temperature behavior of silicon carbide (SiC) coatings deposited on Fe-C-Al-Mo alloys under concentrated solar flux. Substrates were pre-oxidized to form a continuous 1–2 µm α-Al2O3 interlayer, serving as a chemical and mechanical buffer. SiC coatings (10–24 µm thick) were deposited via High-Temperature Chemical Vapor Deposition (HT-CVD). Characterization using XRD, SEM, EDS, and optical spectrophotometry identified cubic 3C-SiC with a globular microstructure and high compressive residual stresses (−2000 to −2400 MPa), inducing microcracking. Stress relaxation was achieved by increasing coating thickness or post-deposition annealing. Controlled oxidation formed a thin silica layer, enhancing solar absorptivity to over 90%. Accelerated thermal cycling (up to ~900 kW/m2, 1050–1200 °C) revealed that coating stability depends on SiC thickness, residual stress evolution, α-Al2O3 interlayer thickness, and cycling severity. Optimizing these parameters is essential for ensuring the long-term durability of hybrid CSP receivers.
Funding
- National Research Agency
Cite
APA
Ndiaye, T., Reoyo-Prats, R., Mercier, F., Encinas, T., Coindeau, S., Escape, C., & Charpentier, L. (2026). Elaboration and Solar Thermal Cycling of SiC/Al2O3/Fe–Cr–Al–Mo Multilayers. Corrosion and Materials Degradation, 7(2), 28. https://doi.org/10.3390/cmd7020028
Vancouver
Ndiaye T, Reoyo-Prats R, Mercier F, Encinas T, Coindeau S, Escape C, et al. Elaboration and Solar Thermal Cycling of SiC/Al2O3/Fe–Cr–Al–Mo Multilayers. Corrosion and Materials Degradation. 2026;7(2):28. doi:10.3390/cmd7020028
BibTeX
@article{Ndiaye2026,
author = {Ndiaye, Thiane and Reoyo-Prats, Reine and Mercier, Frédéric and Encinas, Thierry and Coindeau, Stéphane and Escape, Christophe and Charpentier, Ludovic},
title = {Elaboration and Solar Thermal Cycling of SiC/Al2O3/Fe–Cr–Al–Mo Multilayers},
journal = {Corrosion and Materials Degradation},
year = {2026},
volume = {7},
number = {2},
pages = {28},
doi = {10.3390/cmd7020028}
}
EUVIMED