EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Corrosion at the Steel–Medium Interface

Robert E. Melchers

Corrosion and Materials Degradation · 2024-01-29 · 5 (1) · 52-72

DOI: 10.3390/cmd5010003 ↗

At a glance

Journal article in Corrosion and Materials Degradation, published online on 2024-01-29. Written by Robert E. Melchers. Cited 15 times so far (Crossref); 76 references. The full text is freely available (open access, CC BY 4.0). Funded by: Australian Research Council.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Corrosion on the interface between a metal alloy, such as steel, and a wet, permeable non-metallic medium is of considerable practical interest. Examples include the interface between steel and water, the atmosphere or concrete, as for steel reinforcement bars; between metal and soil, as for buried cast iron or steel pipes; deposits of some type, as in under-deposit corrosion; and the interface with insulation, protective coatings, or macro- or micro-biological agents. In all cases, corrosion initiation depends on the characteristics of the interfacial zone, both of the metal and the medium, and the spatial variability. For (near-)homogeneous semi-infinite media with good interfacial contact, the pitting, crevices and general corrosion of the metal will be largely controlled by the metal (micro-)characteristics, including its inclusions, imperfections and surface roughness. In other cases, these may be overshadowed by the macro-characteristics of the medium and the degree of interfacial contact, possibly with severe resulting corrosion. Where the build-up of corrosion products can occur at the interface, they will dominate longer-term corrosion and govern the long-term corrosion rate. For media of finite thickness, diffusion issues and material deterioration may also be involved. The practical implications are outlined. It is argued that with the presence of a suitable medium, it is possible to achieve negligible long-term corrosion but only if certain practical actions are taken.

Funding

  • Australian Research Council

Cite

APA

Melchers, R. E. (2024). Corrosion at the Steel–Medium Interface. Corrosion and Materials Degradation, 5(1), 52-72. https://doi.org/10.3390/cmd5010003

Vancouver

Melchers RE. Corrosion at the Steel–Medium Interface. Corrosion and Materials Degradation. 2024;5(1):52-72. doi:10.3390/cmd5010003

BibTeX
@article{Melchers2024,
  author = {Melchers, Robert E.},
  title = {Corrosion at the Steel–Medium Interface},
  journal = {Corrosion and Materials Degradation},
  year = {2024},
  volume = {5},
  number = {1},
  pages = {52--72},
  doi = {10.3390/cmd5010003}
}
Start for free →