EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploratory Flexural and Compressive Response of Hot-Pressed Composites Made from Source-Sorted Recycled Plastic and Eucalyptus Wood Particles

Camila Fernandez-Morocho, Jose Chavez-Torres

Clean Technologies · 10.11.2026 · 8 (6) · 185

DOI: 10.3390/cleantechnol8060185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clean Technologies, online erschienen am 10.11.2026. Verfasst von Camila Fernandez-Morocho und 1 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Técnica Particular de Loja.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This exploratory study investigated hot-pressed composites prepared from source-sorted, nominally HDPE-designated post-consumer plastic and screened Eucalyptus wood-processing particles at 0, 10, 20, and 30 wt.% wood content. Polymer identity was assigned from collection/sorting records, not confirmed by spectroscopy or thermal analysis. Three flexural subspecimens were sectioned from one plate for each composition; independent compression-batch replication was not established. The recorded peak nominal flexural stress decreased from 23.30 ± 1.55 MPa for the unfilled control to 21.92 ± 1.73, 18.30 ± 2.78, and 11.81 ± 0.52 MPa, respectively. Peak nominal compressive stresses were 15.78 ± 1.55, 9.16 ± 0.56, 13.05 ± 2.78, and 11.48 ± 0.91 MPa, giving a non-monotonic descriptive pattern. Relative to the unfilled control, the 10 wt.% mixture retained 94.1% of peak nominal flexural stress and 58.0% of peak nominal compressive stress; the corresponding values at 20 wt.% were 78.5% and 82.7%. A weighting sensitivity analysis shows that the preferred composition depends on the relative importance of the two loading modes. Original modulus estimates based on a fixed 10–20 N load window were excluded from engineering conclusions. The measurements describe within-campaign, specimen-level performance and do not establish standardized strength, batch reproducibility, or product suitability.

Förderung

  • Universidad Técnica Particular de Loja

Zitieren

APA

Fernandez-Morocho, C., & Chavez-Torres, J. (2026). Exploratory Flexural and Compressive Response of Hot-Pressed Composites Made from Source-Sorted Recycled Plastic and Eucalyptus Wood Particles. Clean Technologies, 8(6), 185. https://doi.org/10.3390/cleantechnol8060185

Vancouver

Fernandez-Morocho C, Chavez-Torres J. Exploratory Flexural and Compressive Response of Hot-Pressed Composites Made from Source-Sorted Recycled Plastic and Eucalyptus Wood Particles. Clean Technologies. 2026;8(6):185. doi:10.3390/cleantechnol8060185

BibTeX
@article{FernandezMorocho2026,
  author = {Fernandez-Morocho, Camila and Chavez-Torres, Jose},
  title = {Exploratory Flexural and Compressive Response of Hot-Pressed Composites Made from Source-Sorted Recycled Plastic and Eucalyptus Wood Particles},
  journal = {Clean Technologies},
  year = {2026},
  volume = {8},
  number = {6},
  pages = {185},
  doi = {10.3390/cleantechnol8060185}
}
Kostenlos starten →